Adsorption of dyes using Al2O3-bio-based nanosorbent: kinetic and thermodynamic studies

The continuous discharge of wastewater containing synthetic dyes presents serious environmental and health challenges due to its toxicity, chemical stability, and difficulty in degradation. This calls for concern and therefore, necessitating the development of a sustainable and efficient biosorbent. This study prepared a sustainable nanoadsorbent from snail shell wastes impregnated with aluminum chloride to produce a biomass-alumina (Al 2 O 3 –CaO) nanosorbent for removing methylene blue (MB) and thymol blue (TB) from wastewater. The prepared material was characterized using FTIR, XRD, SEM, EDX, and pH pzc analysis, followed by batch adsorption studies. The adsorption data were fitted to the Freundlich, Sips, and Temkin isotherms and to pseudo-first- and second-order kinetic models. The FTIR analysis shows Me–O stretches at 550 and 838 cm −1 . XRD confirmed its crystalline structure with an average particle size of 24.73 ± 2.90 nm. SEM micrographs showed uniformly dispersed spherical nanostructures, while EDX analysis confirmed the presence of Al, Ca, and O, confirming composite formation, with a pH pzc value of 6.35. The adsorption equilibrium data were best fitted by the Freundlich model, with R 2 values of 0.98 and 0.94 for MB and TB, with corresponding K F values of 366.46 and 208.84 mg/g, respectively. The kinetic results followed the pseudo-first-order model. Thermodynamic analysis recorded positive ΔS° value and ΔG° < 0, for both dyes, while ΔH° = + 68.24 and − 2.98 kJ mol⁻ 1 for MB and TB, respectively. Al 2 O 3 -CaO showed remarkable stability and reusability during four consecutive adsorption–desorption cycles. This study shows the nanosorbent as a probable material for the remediation dye-laden wastewater.

Authors

Institutions

Publication Details

Journal
International Journal of Environmental Science and Technology
Published
2026-11-16
DOI
https://doi.org/10.1007/s13762-026-07571-w
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Adsorption of dyes using Al2O3-bio-based nanosorbent: kinetic and thermodynamic studies

Abayomi Bamisaye, M. A. Idowu, O. O. Ogunlaja, O. I. Surajudeen et al.
4 links
International Journal of Environmental Science and Technology
Adsorption and biosorption for pollutant removal
article

Adsorption of dyes using Al2O3-bio-based nanosorbent: kinetic and thermodynamic studies

Abayomi Bamisaye, M. A. Idowu, O. O. Ogunlaja, O. I. Surajudeen, H. W. Langmi, M. A. Adekola, K. A. Adegoke
article en

Abstract

The continuous discharge of wastewater containing synthetic dyes presents serious environmental and health challenges due to its toxicity, chemical stability, and difficulty in degradation. This calls for concern and therefore, necessitating the development of a sustainable and efficient biosorbent. This study prepared a sustainable nanoadsorbent from snail shell wastes impregnated with aluminum chloride to produce a biomass-alumina (Al 2 O 3 –CaO) nanosorbent for removing methylene blue (MB) and thymol blue (TB) from wastewater. The prepared material was characterized using FTIR, XRD, SEM, EDX, and pH pzc analysis, followed by batch adsorption studies. The adsorption data were fitted to the Freundlich, Sips, and Temkin isotherms and to pseudo-first- and second-order kinetic models. The FTIR analysis shows Me–O stretches at 550 and 838 cm −1 . XRD confirmed its crystalline structure with an average particle size of 24.73 ± 2.90 nm. SEM micrographs showed uniformly dispersed spherical nanostructures, while EDX analysis confirmed the presence of Al, Ca, and O, confirming composite formation, with a pH pzc value of 6.35. The adsorption equilibrium data were best fitted by the Freundlich model, with R 2 values of 0.98 and 0.94 for MB and TB, with corresponding K F values of 366.46 and 208.84 mg/g, respectively. The kinetic results followed the pseudo-first-order model. Thermodynamic analysis recorded positive ΔS° value and ΔG° < 0, for both dyes, while ΔH° = + 68.24 and − 2.98 kJ mol⁻ 1 for MB and TB, respectively. Al 2 O 3 -CaO showed remarkable stability and reusability during four consecutive adsorption–desorption cycles. This study shows the nanosorbent as a probable material for the remediation dye-laden wastewater.

International Journal of Environmental Science and TechnologyVol. 23(12)
Federal University of Agriculture, Abeokuta (NG), Redeemer's University (NG), University of Pretoria (ZA), Lead City University (NG), Saveetha University (IN)
University of Pretoria
Clean water and sanitation, Responsible consumption and production
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon