Effect of PDMS Sponge-Derived Silicon Oxycarbide Particles on Water Incorporation and Rheology in PDMS–THF Mixtures

Here we report preparing silicon oxycarbide (SiOC) particles from the commercially available polydimethylsiloxane (PDMS), with radically different morphologies depending on the processing conditions. We first prepare PDMS sponge, which acts as the precursor material for the SiOC particles, by heating a solution of PDMS and cross-linker in THF with suitable concentrations. The cross-linking reaction simultaneously occurring with the bubble formation from boiling the THF results in the formation of a sponge. The sponge pieces are kept under two different thermal environments which yield silicon oxycarbide with entirely different morphologies. Sponges open to the atmosphere and subject to slow heating to 550 °C and slow cooling yield a soft powder, whereas covering it inside an aluminium foil and subjecting to fast heating and fast cooling yields a brittle solid film. XRD, FT-IR and XPS confirm SiOC formation. The SEM imaging of the soft powder shows particles of nearly spherical shape with sizes ranging from 100-500 nm whereas the brittle solid when crushed and ground, shows much larger particles. The BET surface area was found to be 4.36 m 2 ∙g −1 and 190 m 2 ∙g −1 respectively for the soft the brittle powders. These particles remarkably enhanced the miscibility of water in the binary mixture of PDMS-THF, with a concurrent enhancement in viscosity as water was added. Adding 1.25 wt% of soft and brittle particles to a 5:4 mixture of PDMS-THF increased its viscosity by 1.5 and 2 times respectively and could accommodate up to 40 wt% water without phase separation. Addition of 30 wt% DI water to the PDMS-THF-particle mixtures led to an increase in viscosity by nearly ten-fold and twenty-fold respectively with soft and brittle particles. Viscosity enhancement upon the addition of water can be attributed to increased hydrogen bonding between the water molecules and particles and the enhanced surface of the particles.

Authors

Institutions

Publication Details

Journal
ChemRxiv
Published
2026-11-16
DOI
https://doi.org/10.26434/chemrxiv.15012267/v1
Primary Topic
Silicone and Siloxane Chemistry
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Effect of PDMS Sponge-Derived Silicon Oxycarbide Particles on Water Incorporation and Rheology in PDMS–THF Mixtures

Shama Perween, Yogendra Yadawa, Soumya Kedia, Amit Ranjan
1 links
ChemRxiv
Silicone and Siloxane Chemistry
preprint

Effect of PDMS Sponge-Derived Silicon Oxycarbide Particles on Water Incorporation and Rheology in PDMS–THF Mixtures

Shama Perween, Yogendra Yadawa, Soumya Kedia, Amit Ranjan
preprint en

Abstract

Here we report preparing silicon oxycarbide (SiOC) particles from the commercially available polydimethylsiloxane (PDMS), with radically different morphologies depending on the processing conditions. We first prepare PDMS sponge, which acts as the precursor material for the SiOC particles, by heating a solution of PDMS and cross-linker in THF with suitable concentrations. The cross-linking reaction simultaneously occurring with the bubble formation from boiling the THF results in the formation of a sponge. The sponge pieces are kept under two different thermal environments which yield silicon oxycarbide with entirely different morphologies. Sponges open to the atmosphere and subject to slow heating to 550 °C and slow cooling yield a soft powder, whereas covering it inside an aluminium foil and subjecting to fast heating and fast cooling yields a brittle solid film. XRD, FT-IR and XPS confirm SiOC formation. The SEM imaging of the soft powder shows particles of nearly spherical shape with sizes ranging from 100-500 nm whereas the brittle solid when crushed and ground, shows much larger particles. The BET surface area was found to be 4.36 m 2 ∙g −1 and 190 m 2 ∙g −1 respectively for the soft the brittle powders. These particles remarkably enhanced the miscibility of water in the binary mixture of PDMS-THF, with a concurrent enhancement in viscosity as water was added. Adding 1.25 wt% of soft and brittle particles to a 5:4 mixture of PDMS-THF increased its viscosity by 1.5 and 2 times respectively and could accommodate up to 40 wt% water without phase separation. Addition of 30 wt% DI water to the PDMS-THF-particle mixtures led to an increase in viscosity by nearly ten-fold and twenty-fold respectively with soft and brittle particles. Viscosity enhancement upon the addition of water can be attributed to increased hydrogen bonding between the water molecules and particles and the enhanced surface of the particles.

ChemRxiv
University of Stuttgart (DE), Indian Institute of Technology Bombay (IN), University of Mumbai (IN), Sandip Institute of Technology & Research Centre (IN), Rajiv Gandhi Institute of Petroleum Technology (IN)
Silicone and Siloxane Chemistry
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon