Analysis and optimization research on the energy absorption characteristics of thin-walled energy absorbing components

Traditional square pre-folded energy-absorbing components are prone to port retraction, local instability and abrupt load-valley drops during dynamic crushing. To address this problem, a double-layer multi-cell reinforced energy-absorbing component was proposed by combining end constraint rings, a reverse pre-folded embedded tube and radial ribs. Physical compression tests on the baseline component, ABAQUS/Explicit simulations, parametric analysis and bounded candidate screening were used to examine crushing deformation, strain redistribution and energy absorption performance. The experiment-simulation comparison showed that the errors in the initial peak load, first valley load, mean crushing force and energy absorption over the validation interval were 0.43%, 11.12%, 1.69% and 1.52%, respectively. This agreement indicates that the finite element model captured the nonlinear crushing response of the pre-folded component and can be used for mechanism-oriented comparative analysis. The added cooperative constraint system changed the port shrinkage and side-wall local instability paths, enabling load-valley compensation and plastic strain redistribution. Within an effective crushing stroke of 125 mm, the FE-predicted Component V showed relatively high load-carrying and energy-absorption capacity, with Fmax of approximately 2475 kN, Fmean of approximately 1960 kN, Δ of approximately 1.26 and Ei of approximately 245 kJ. For a model mass of 5.36 kg, its SEA was approximately 45.7 kJ·kg−1. Compared with Component I, Component V increased Ei and SEA by approximately 56.2% and 43.0%, respectively, while markedly reducing Cv and η. Compared with Component IV, Component V provided higher energy absorption and lower full-curve fluctuation indices, whereas Component IV had a lower peak-to-mean force ratio. Component V is therefore interpreted as a high-energy-absorption candidate design within the investigated structural scope, while Component IV is more appropriate for conditions emphasising peak-load control.

Authors

Institutions

Publication Details

Journal
International Journal of Crashworthiness
Published
2026-11-16
DOI
https://doi.org/10.1080/13588265.2026.2730078
Primary Topic
Cellular and Composite Structures
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Analysis and optimization research on the energy absorption characteristics of thin-walled energy absorbing components

Hailiang Xu, Wujian Xiao, Dong An, Jia-wei Tu
1 links
International Journal of Crashworthiness
Cellular and Composite Structures
article

Analysis and optimization research on the energy absorption characteristics of thin-walled energy absorbing components

Hailiang Xu, Wujian Xiao, Dong An, Jia-wei Tu
article en

Abstract

Traditional square pre-folded energy-absorbing components are prone to port retraction, local instability and abrupt load-valley drops during dynamic crushing. To address this problem, a double-layer multi-cell reinforced energy-absorbing component was proposed by combining end constraint rings, a reverse pre-folded embedded tube and radial ribs. Physical compression tests on the baseline component, ABAQUS/Explicit simulations, parametric analysis and bounded candidate screening were used to examine crushing deformation, strain redistribution and energy absorption performance. The experiment-simulation comparison showed that the errors in the initial peak load, first valley load, mean crushing force and energy absorption over the validation interval were 0.43%, 11.12%, 1.69% and 1.52%, respectively. This agreement indicates that the finite element model captured the nonlinear crushing response of the pre-folded component and can be used for mechanism-oriented comparative analysis. The added cooperative constraint system changed the port shrinkage and side-wall local instability paths, enabling load-valley compensation and plastic strain redistribution. Within an effective crushing stroke of 125 mm, the FE-predicted Component V showed relatively high load-carrying and energy-absorption capacity, with Fmax of approximately 2475 kN, Fmean of approximately 1960 kN, Δ of approximately 1.26 and Ei of approximately 245 kJ. For a model mass of 5.36 kg, its SEA was approximately 45.7 kJ·kg−1. Compared with Component I, Component V increased Ei and SEA by approximately 56.2% and 43.0%, respectively, while markedly reducing Cv and η. Compared with Component IV, Component V provided higher energy absorption and lower full-curve fluctuation indices, whereas Component IV had a lower peak-to-mean force ratio. Component V is therefore interpreted as a high-energy-absorption candidate design within the investigated structural scope, while Component IV is more appropriate for conditions emphasising peak-load control.

International Journal of Crashworthiness
North China University of Technology (CN)
National Natural Science Foundation of China
Industry, innovation and infrastructure
Cellular and Composite Structures
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon