Hotspot Heat Flow: Conductive Anomaly, Plume Heat Transport and Lithospheric Reheating Budget at Hawaii
If a plume delivers hundreds of gigawatts of excess heat beneath a plate, the seafloor above it should leak measurably more heat than cooling alone predicts, and the size of that leak is one of the oldest quantitative tests of the plume idea at Hawaii. The budget multiplies the adopted heat-flow anomaly by swell area for the total conductive excess, expresses plume heat transport per unit swell area for comparison, computes the diffusion depth heat can reach during the plate's transit across the swell, and prices the reheating of that layer so supply and demand can be set side by side. Headline values are heat anomaly mw per m2 heat = 12; heat swell area km2 heat = 1.327e+06; heat conductive excess gigawatts heat = 15.93; heat plume transport gigawatts heat = 348; heat conductive fraction percent heat = 4.577; heat plume flux density mw per m2 heat = 262.2. The advected remainder is printed explicitly rather than left implicit, since it is the share that decides whether a small surface anomaly counts against the plume or for it.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-16
- DOI
- https://doi.org/10.5281/zenodo.24274087
- Primary Topic
- Geological and Geophysical Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00