Study of reinforcement in gypsum and cement mortar matrices using polymer fibers from recycling processes
Over the past few decades many studies have explored reinforcing gypsum or cement mortar matrices with various fibers. This study focuses on using recycled polymer fibers to improve the ductility, tensile strength, and flexural strength of these materials, promoting the reuse of plastic waste. It also analyzes the feasibility of using recycled plastic flakes or fibers as reinforcement. The research analyzes the interface between these recycled polymers and the gypsum/cement matrices. To find the optimal conditions for mechanical reinforcement, different polymer types, geometries, and embedding depths are tested. Pull-out tests on specimens with embedded fibers are conducted and monitored with a digital image correlation (DIC) system. This study shows that fiber length and geometry are key factors to ensure good fibre reinforcement, with very short lengths leading to negligible reinforcement and with wavy shapes allowing better fibre performance.
Authors
- Fernando Suárez (ORCID: https://orcid.org/0000-0002-8834-104X)
- J.L. García (ORCID: https://orcid.org/0009-0002-4358-0693)
Institutions
- Universidad de Jaén (ES)
Publication Details
- Journal
- Materiales de Construcción
- Published
- 2026-11-16
- DOI
- https://doi.org/10.3989/mc.2026.430625
- Primary Topic
- Innovative concrete reinforcement materials
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Ministerio de Ciencia, Innovación y Universidades