An analytical approach to reach the initial stress equilibrium state in numerical simulation

Introduction The initial stress equilibrium state is the foundation to conduct calculation in numerical simulation. Methods To obtain the initial stress, this paper proposed an analytical method. The Heim’s law and the Kinnick’s law were combined with the stress calculation method in the FLAC3D software. Then, the calculation equation to obtain the initial vertical stress was obtained. Since the vertical stress was continuous at the interface between different rock strata, the initial vertical stress values of each rock strata can be obtained. Results Users only need to input the model dimension and corresponding parameters. Then, the initial stress results can be obtained directly. After substituting the obtained results into the FLAC3D software, the initial stress equilibrium state can be quickly obtained. A numerical model of a coal mine was used to check the accuracy of this analytical method. There was an accepted correlation between the results calculated with this analytical method and the in situ observation results. Discussion The proposed method can reduce the numerical time steps and improve the calculation efficiency.

Authors

Institutions

Publication Details

Journal
Frontiers in Earth Science
Published
2026-11-16
DOI
https://doi.org/10.3389/feart.2026.2001489
Primary Topic
Geomechanics and Mining Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

An analytical approach to reach the initial stress equilibrium state in numerical simulation

王存文, Jianhang Chen, Chaohong Shi, Yang Yang
Frontiers in Earth Science
Geomechanics and Mining Engineering
article

An analytical approach to reach the initial stress equilibrium state in numerical simulation

王存文, Jianhang Chen, Chaohong Shi, Yang Yang
article en

Abstract

Introduction The initial stress equilibrium state is the foundation to conduct calculation in numerical simulation. Methods To obtain the initial stress, this paper proposed an analytical method. The Heim’s law and the Kinnick’s law were combined with the stress calculation method in the FLAC3D software. Then, the calculation equation to obtain the initial vertical stress was obtained. Since the vertical stress was continuous at the interface between different rock strata, the initial vertical stress values of each rock strata can be obtained. Results Users only need to input the model dimension and corresponding parameters. Then, the initial stress results can be obtained directly. After substituting the obtained results into the FLAC3D software, the initial stress equilibrium state can be quickly obtained. A numerical model of a coal mine was used to check the accuracy of this analytical method. There was an accepted correlation between the results calculated with this analytical method and the in situ observation results. Discussion The proposed method can reduce the numerical time steps and improve the calculation efficiency.

Frontiers in Earth ScienceVol. 14
China University of Mining and Technology - Beijing (CN)
Geomechanics and Mining Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon