Tuning Inter- and Intraparticle Crosslinking and Packing Density Governs the 3D Bioprintability and Biological Performance
Granular hydrogels are an emerging class of microporous biomaterials assembled from annealable microparticles that enhance cell survival, function, infiltration, and cell migration through their interconnected cell-scale void spaces. Here, we aimed to understand how balancing inter- and intraparticle interactions, alongside microparticle packing density, influences the printability and cellular responses of granular hydrogels. Mechanically fragmented microparticles, made of tyramine-modified alginate (TAlg) and gelatin (TGel), underwent primary enzymatic gelation and secondary photocrosslinking for construct stabilization. Balancing this two-scale chemical trade-off yielded a compressive modulus of 12.9-24.7 kPa, while rapid photoinitiator clearance (>90% within 1 h) ensured high cytocompatibility. Incorporating 10-40 vol % interstitial matrix tuned total porosity from ∼7 to 18%, with medium-packed inks (20 vol % matrix) achieving high fidelity for three-dimensional (3D) bioprinting without sacrificing void connectivity. The resulting interconnected network accelerated cell infiltration to a depth of 450 μm within 3 days (∼3-fold higher than bulk hydrogels) and enabled ex vivo tissue adhesion (7.1 kPa shear strength). 3D-bioprinted granular constructs supported dense interconnected 3D cellular network formation over 7 days. This scalable strategy to deconstruct di-tyramine-mediated bulk hydrogels provides a versatile toolbox for advanced biofabrication and complex tissue engineering.
Authors
- Liliana Agresti
- Jelmer Sjollema (ORCID: https://orcid.org/0000-0003-0714-3082)
- Hélder A. Santos (ORCID: https://orcid.org/0000-0001-7850-6309)
- Monize Caiado Decarli (ORCID: https://orcid.org/0000-0002-7100-3394)
- Mohammad-Ali Shahbazi (ORCID: https://orcid.org/0000-0003-4256-9951)
- Theo van Kooten
- Asma-Sadat Vaziri
Institutions
- University of Groningen (NL)
Publication Details
- Journal
- ACS Applied Materials & Interfaces
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1021/acsami.6c17034
- Primary Topic
- 3D Printing in Biomedical Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek
- Universitair Medisch Centrum Groningen