Effect of Extrusion Binder on the Structure and Propane Dehydrogenation Performance of Pt-Sn Catalyst Bodies

Pt-Sn catalysts for propane dehydrogenation (PDH) have been widely studied in powder form; however, the combined effects of binder type and content on the shapeability, structural integrity, and catalytic behavior of extruded Pt-Sn catalysts for PDH remain largely unexplored. Commercial γ-Al2O3 and hydrotalcite-derived Mg(Al)O pellets were compared with hydrotalcite-rich extruded bodies formulated using boehmite-derived alumina or sepiolite binders. The results revealed that binder selection affected extrusion feasibility, pore architecture, mechanical strength (crushing strengths of 3.0–15.0 N/mm for the selected extrudates), and the radial distribution of the metal phase. Among the investigated systems, the hydrotalcite-derived Mg(Al)O reference exhibited the most favorable PDH performance (~30% propane conversion, close to equilibrium, with an apparent ~4% activity loss over 12 h), while the γ-Al2O3-supported catalyst showed the lowest propane conversion and selectivity. The extruded composites delivered intermediate performance, and increasing the boehmite content from 10 to 30 wt.% increased the coking rate fivefold. Notably, the hydrotalcite–sepiolite catalyst maintained stable conversion and ~94% propylene selectivity despite a higher coking rate, which TEM-EDX associated with coke deposition on the support rather than on the Pt-Sn particles. Overall, binder selection is a key factor controlling the structural, mechanical, and catalytic properties of extruded Pt-Sn catalyst bodies and reveals a trade-off between mechanical integrity and catalytic performance.

Authors

Institutions

Publication Details

Journal
Catalysts
Published
2026-11-16
DOI
https://doi.org/10.3390/catal16111019
Primary Topic
Catalysis and Oxidation Reactions
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Extrusion Binder on the Structure and Propane Dehydrogenation Performance of Pt-Sn Catalyst Bodies

Servet Turan, Cem Aciksari, Umut Savacı, Irmak Su Ökten et al.
2 links
Catalysts
Catalysis and Oxidation Reactions
article

Effect of Extrusion Binder on the Structure and Propane Dehydrogenation Performance of Pt-Sn Catalyst Bodies

Servet Turan, Cem Aciksari, Umut Savacı, Irmak Su Ökten, Serdar S. Çelebi, Gizem Is
article en

Abstract

Pt-Sn catalysts for propane dehydrogenation (PDH) have been widely studied in powder form; however, the combined effects of binder type and content on the shapeability, structural integrity, and catalytic behavior of extruded Pt-Sn catalysts for PDH remain largely unexplored. Commercial γ-Al2O3 and hydrotalcite-derived Mg(Al)O pellets were compared with hydrotalcite-rich extruded bodies formulated using boehmite-derived alumina or sepiolite binders. The results revealed that binder selection affected extrusion feasibility, pore architecture, mechanical strength (crushing strengths of 3.0–15.0 N/mm for the selected extrudates), and the radial distribution of the metal phase. Among the investigated systems, the hydrotalcite-derived Mg(Al)O reference exhibited the most favorable PDH performance (~30% propane conversion, close to equilibrium, with an apparent ~4% activity loss over 12 h), while the γ-Al2O3-supported catalyst showed the lowest propane conversion and selectivity. The extruded composites delivered intermediate performance, and increasing the boehmite content from 10 to 30 wt.% increased the coking rate fivefold. Notably, the hydrotalcite–sepiolite catalyst maintained stable conversion and ~94% propylene selectivity despite a higher coking rate, which TEM-EDX associated with coke deposition on the support rather than on the Pt-Sn particles. Overall, binder selection is a key factor controlling the structural, mechanical, and catalytic properties of extruded Pt-Sn catalyst bodies and reveals a trade-off between mechanical integrity and catalytic performance.

CatalystsVol. 16(11)
Eskisehir Technical University (TR), CPCL Polytechnic College (IN)
European Commission, Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
Catalysis and Oxidation Reactions
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon