Atomic Layer Deposited Zirconium Dioxide/PTFE Separators for Intermediate‐Temperature Alkaline Water Electrolysis: In Situ Characterization

ABSTRACT Intermediate‐temperature alkaline water electrolysis (100–200°C), which improves electrolysis efficiency by reducing cell voltage and enhancing reaction kinetics, has the potential compared to conventional low‐temperature (60–90°C) operation but requires separators that remain stable above the ∼110°C limit of the benchmark Zirfon UTP‐500. Building on our previous demonstration that microporous polytetrafluoroethylene (PTFE) membranes can be rendered hydrophilic by atomic layer deposition (ALD) of ZrO 2 , this work reports the electrochemical behaviour of these separators under industrially relevant conditions. In this work, two ALD‐modified PTFE membranes with different aspect ratios (membrane thickness to pore diameter) were characterized and compared with a benchmark polyphenylene sulphide (PPS) non‐woven diaphragm. The characterizations included potentiostatic electrochemical impedance spectroscopy (PEIS) in 45 wt% KOH at 30 bar, covering heating and cooling cycles up to 175°C, as well as gas‐crossover assessments in a zero‐gap flow cell at 80°C. Area‐specific resistance for all separators consistently decreased with increasing temperature, with PTFE membranes showing fully reversible resistance recovery after exposure to 175°C. Importantly, hydrogen‐in‐oxygen concentrations remained below the 2 vol% safety threshold throughout the operational range down to 50 mA cm −2 . Post‐mortem analyses via scanning electron microscopy with energy‐dispersive x‐ray spectroscopy (SEM/EDS), FTIR and x‐ray diffraction (XRD) revealed significant dissolution of the amorphous ALD ZrO 2 coating in hot concentrated KOH, whereas the underlying PTFE matrix maintained its chemical integrity. Despite this substantial coating loss, separator conductivity remained unaffected, supporting that the ALD coating primarily functions as a wetting facilitator, with ionic transport sustained by the electrolyte‐filled network.

Authors

Institutions

Publication Details

Journal
Chemie Ingenieur Technik
Published
2026-11-16
DOI
https://doi.org/10.1002/cite.70193
Primary Topic
Fuel Cells and Related Materials
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Atomic Layer Deposited Zirconium Dioxide/PTFE Separators for Intermediate‐Temperature Alkaline Water Electrolysis: In Situ Characterization

Christodoulos Chatzichristodoulou, Vesa Ruuskanen, Jens Oluf Jensen, Pradipkumar Manubhai Leuaa et al.
3 links
Chemie Ingenieur Technik
Fuel Cells and Related Materials
article

Atomic Layer Deposited Zirconium Dioxide/PTFE Separators for Intermediate‐Temperature Alkaline Water Electrolysis: In Situ Characterization

Christodoulos Chatzichristodoulou, Vesa Ruuskanen, Jens Oluf Jensen, Pradipkumar Manubhai Leuaa, Mikkel Rykær Kraglund, Matti I. Putkonen, Pertti Kauranen, Antti Kosonen, R.H. Abu Zahra
article en

Abstract

ABSTRACT Intermediate‐temperature alkaline water electrolysis (100–200°C), which improves electrolysis efficiency by reducing cell voltage and enhancing reaction kinetics, has the potential compared to conventional low‐temperature (60–90°C) operation but requires separators that remain stable above the ∼110°C limit of the benchmark Zirfon UTP‐500. Building on our previous demonstration that microporous polytetrafluoroethylene (PTFE) membranes can be rendered hydrophilic by atomic layer deposition (ALD) of ZrO 2 , this work reports the electrochemical behaviour of these separators under industrially relevant conditions. In this work, two ALD‐modified PTFE membranes with different aspect ratios (membrane thickness to pore diameter) were characterized and compared with a benchmark polyphenylene sulphide (PPS) non‐woven diaphragm. The characterizations included potentiostatic electrochemical impedance spectroscopy (PEIS) in 45 wt% KOH at 30 bar, covering heating and cooling cycles up to 175°C, as well as gas‐crossover assessments in a zero‐gap flow cell at 80°C. Area‐specific resistance for all separators consistently decreased with increasing temperature, with PTFE membranes showing fully reversible resistance recovery after exposure to 175°C. Importantly, hydrogen‐in‐oxygen concentrations remained below the 2 vol% safety threshold throughout the operational range down to 50 mA cm −2 . Post‐mortem analyses via scanning electron microscopy with energy‐dispersive x‐ray spectroscopy (SEM/EDS), FTIR and x‐ray diffraction (XRD) revealed significant dissolution of the amorphous ALD ZrO 2 coating in hot concentrated KOH, whereas the underlying PTFE matrix maintained its chemical integrity. Despite this substantial coating loss, separator conductivity remained unaffected, supporting that the ALD coating primarily functions as a wetting facilitator, with ionic transport sustained by the electrolyte‐filled network.

Chemie Ingenieur Technik
University of Helsinki (FI), Lappeenranta-Lahti University of Technology (FI), Technical University of Denmark (DK)
Jane ja Aatos Erkon Säätiö
Affordable and clean energy, Clean water and sanitation
Fuel Cells and Related Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon