How can lithium be recovered selectively from low-concentration brines with minimal water and energy use
This revised article addresses Q0131, 'How can lithium be recovered selectively from low-concentration brines with minimal water and energy use?' using a question-specific mathematical construction rather than a generic logarithmic template. The proposed model, termed the Dilute-Brine Lithium Recovery Model, uses Li flux J_Li, Mg/Na competing fluxes, Li/Mg selectivity alpha, water use W and energy E and is ordered along brine concentration, membrane charge and process time. The construction is anchored to external primary research classified as STRONG DIRECT SUPPORT in the validation atlas. The external evidence establishes experimentally measurable mechanisms or target performance; it is not conflated with proof of the new equation itself. The model defines explicit state variables, derives a dimensionless objective or hazard, specifies a prospective calibration procedure, and states falsifiable predictions. The experimental constraint carried forward from the atlas is: Lithium/Mg separation from brines is demonstrated with high selectivity and practical brine tests. The article incorporates the required correction: Add water/energy use per kg Li and long-term membrane stability.
Authors
- Begüm Yıldırım
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-16
- DOI
- https://doi.org/10.5281/zenodo.24283588
- Primary Topic
- Extraction and Separation Processes
- Type
- preprint