Inverse identification of bending moments in large-diameter pressurized pipes based on cross-sectional microdeformation
Existing studies on pipeline ovalization mainly focus on the forward prediction of cross-sectional deformation under prescribed bending moments. This study addresses the inverse problem of identifying unknown bending moments from measurable cross-sectional microdeformation under known internal pressure. A deformation-based identification framework is developed by extracting the second-order ovalization mode and separating pressure-induced axisymmetric expansion from bending-induced non-axisymmetric deformation. A Knaster pressure-correction method (KPCM) is proposed to recover equivalent unpressurized ovalization, while a curvature-harmonic method (CHM) identifies bending moments from the harmonic characteristics of full cross-sectional contours. Three-dimensional finite element models with different wall thicknesses, internal pressures, and rotation angles are established for closed-loop verification. Results demonstrate that the second-order ovalization mode is an effective indicator for bending-moment reconstruction. Both methods identify only the bending-moment magnitude, while its direction must be known independently. The proposed inverse framework provides a new approach for load identification and structural integrity assessment of pressurized pipelines.
Authors
- Yukun Li (ORCID: https://orcid.org/0009-0000-9941-5756)
- Xianhe Liu (ORCID: https://orcid.org/0009-0007-9049-1390)
- Jiangtao Ma
- Jing Guo
Institutions
- China University of Petroleum, East China (CN)
Publication Details
- Journal
- The Journal of Strain Analysis for Engineering Design
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1177/03093247261505918
- Primary Topic
- Structural Integrity and Reliability Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00