Solvent-Assisted Thermal Extraction and Molecular Characterization of Natural Bitumen from Beke Oil Sands
Oil sands are a potential source of bitumen, and efficient recovery methods are essential for their utilization. In this study, bitumen was recovered from Beke oil sands in Kazakhstan using solvent-assisted thermal extraction at 40–50 °C, followed by filtration and atmospheric distillation. The residual bitumen content was 1.576 wt%, corresponding to a calculated bitumen removal efficiency of 86.9%. High-resolution negative-ion electrospray ionization Fourier-transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS) showed that the detected ions were mainly distributed over an m/z range of 200–700. The O2 class was the most abundant heteroatom class, followed by O3, O4, and N₁. The O2 compounds were mainly distributed over carbon numbers of 16–35 and double-bond equivalent (DBE) values of 1–4, whereas the N₁ compounds were mainly distributed over carbon numbers of 20–40 and DBE values of 10–18. These findings indicate effective bitumen removal under the investigated conditions and provide molecular-level information on the composition of Beke oil-sand bitumen.
Authors
- Yerbol Tileuberdi (ORCID: https://orcid.org/0000-0001-9733-5015)
- Ulan Koshken
Institutions
- Al-Farabi Kazakh National University (KZ)
- Abai Kazakh National Pedagogical University (KZ)
Publication Details
- Journal
- Journal of Engineering and Environmental Systems
- Published
- 2026-11-16
- DOI
- https://doi.org/10.66973/jees.26.011
- Primary Topic
- Petroleum Processing and Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00