Thermomechanical modelling of concrete with aggregate inclusions using total Lagrangian B-spline material point method
Abstract Abstract Concrete with aggregate inclusions exhibit coupled heat transfer, stress-wave propagation, and damage across mortar, aggregates, and interfacial transition zones. This study develops a total Lagrangian B-spline material point method (TLBSMPM) for coupled mechanical and thermal analysis, with interpolation fixed in the reference configuration. We assess the method using elastic-wave and bending benchmarks, a heat-conduction test, a thermally shocked cantilever, and impact simulations of homogeneous and three-phase concrete disks. For TLBSMPM, errors decrease with grid refinement in the wave and heat-conduction tests, and the cantilever frequency agrees with beam theory within 0.75%. In bending, total Lagrangian methods reduce stress oscillations and computation time relative to updated Lagrangian methods at the same grid size. Wave accuracy depends on particle arrangement: linear interpolation performs better for uniform particles, whereas cubic B-splines perform better for the tested nonuniform arrangement. In the three-phase disks, damage concentrates in and around the interfaces. The ranking of mass-weighted global damage changes over time; because undamaged aggregate mass remains in the average, this measure does not compare damage only in mortar and interfaces. These results support phase-resolved thermomechanical analysis under the tested conditions.Keywords: B-spline material point method, total Lagrangian formulation, concrete with aggregate inclusions, thermomechanical modelling, interfacial transition zone
Authors
- Zheng Bo Sun (ORCID: https://orcid.org/0000-0003-0392-0278)
- Xuehua Zhou (ORCID: https://orcid.org/0000-0003-0933-3568)
- Haitao Ding
- Weiling Xiao
Institutions
- Jiangxi University of Science and Technology (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-16
- DOI
- https://doi.org/10.21203/rs.3.rs-11616577/v1
- Primary Topic
- Numerical methods in engineering
- Type
- preprint
Funders
- National Natural Science Foundation of China