Design and Analysis of High-Precision Hydraulic Press Frame for Aviation Based on Finite Element Method
As the core equipment for aerospace product compression molding, the strength, stiffness, and dynamic stability of aviation high-precision hydraulic presses’ four-column frame directly determine product molding accuracy and production safety. This paper optimizes the frame structure and conducts multi-condition finite element analysis via ANSYS. Static strength analysis identifies initial stress concentration; after improvement, the maximum stress in pre-tightening and working states decreases by 41.87% and 66.20% respectively. Modal analysis shows uniform deformation of the first ten modes and confirms columns as the weak link, whose inner slope is optimized for optimal load-bearing. Under 5mm eccentric loads, the maximum stress does not exceed the material yield limit, and deformation is ≤1.06mm. The improved structure effectively solves stress concentration, enhances eccentric load resistance and dynamic stability, providing a structural guarantee for reliable operation.
Authors
- Lu Dong (ORCID: https://orcid.org/0000-0002-2964-4075)
- Jie Pang (ORCID: https://orcid.org/0009-0000-6734-8560)
- Zehua Hua (ORCID: https://orcid.org/0009-0006-3655-5747)
- Rui Nie (ORCID: https://orcid.org/0009-0004-4319-9264)
- Yaoming Fu (ORCID: https://orcid.org/0009-0005-6262-4067)
Institutions
- Civil Aviation Flight University of China (CN)
Publication Details
- Journal
- MANUFACTURING TECHNOLOGY
- Published
- 2026-11-16
- DOI
- https://doi.org/10.21062/mft.2026.041
- Primary Topic
- Engineering Applied Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00