STRATEGIES FOR REDUCING ENERGY CONSUMPTION IN MINERAL COMMINUTION: TECHNOLOGIES, PRETREATMENTS, AND CIRCUIT OPTIMIZATION
Crushing and grinding must provide sufficient mineral liberation while limiting electricity consumption, unnecessary fines generation, and the treatment of barren material. This narrative review examines energy-efficient comminution technologies, ore pretreatments, and circuit optimization using experimental, pilot-scale, industrial, and modelling studies available by 12 November 2026. High-pressure grinding rolls, vertical roller mills, and stirred media mills offer different opportunities according to feed characteristics, required product size, and circuit configuration. Microwave irradiation, conventional heating, high-voltage pulses, and ultrasound can alter breakage behaviour, but improvements in grindability do not necessarily produce a positive process energy balance. Quantitative comparisons are therefore interpreted using their original energy boundaries, product specifications, and evidence scales. A copper-ore vertical roller mill study reported an 18% specific-energy reduction, whereas pilot microwave work supported simulated comminution reductions of up to 9% at a specified plant grind. These outcomes cannot be ranked directly. Classification, grinding-media selection, early gangue rejection, and coordinated process control can reduce avoidable grinding and complement equipment changes. The most defensible selection criterion is the energy required to obtain a metallurgically acceptable product from a defined quantity of original feed, including pretreatment and auxiliary loads. Wider adoption of emerging technologies requires continuous trials, representative ore variability, and transparent mass, energy, and recovery balances.
Authors
- Gabriel Mateus Cubi Fonseca (ORCID: https://orcid.org/0009-0006-5683-5391)
- Guilherme José Oliveira Cubi
- Ana Laura Santos Soares
- Artur Braz Nogueira Lima
Institutions
- Universidade Federal de Alfenas (BR)
Publication Details
- Journal
- Revista Multidisciplinar do Nordeste Mineiro
- Published
- 2026-11-16
- DOI
- https://doi.org/10.66104/6m6bwj36
- Primary Topic
- Mineral Processing and Grinding
- Type
- article
- Field-Weighted Citation Impact
- 0.00