Resin 3D Printing with Dose-Controlled Solubility
Vat photopolymerization (VP) offers high resolution and throughput with low surface roughness, but requires support structures that limit printable geometries, generate non-recyclable waste, and must be removed manually. We introduce dose-controlled selective solubility vat photopolymerization (dSSVP), wherein a low 405 nm light dose forms linear acrylate chains, while high doses deplete a base quencher and initiate cationic epoxide polymerization to form a solvent-resistant crosslinked network. Raman spectroscopy and cure depth measurements quantify the cure kinetics and inhibition period before epoxide polymerization begins. After printing and heat treatment, low-dose regions dissolve rapidly in food-safe solvents, while high-dose regions resist dissolution and exhibit a bending modulus of ≈3 GPa. A variety of complex demonstration prints are presented, including a dental aligner, an MIT “Brass Rat” class ring, and an assembly of interlocked parts. Further advancement of dSSVP could enable fully automated production of finished parts using widely available single-resin desktop VP hardware.
Authors
- Michael N. Durso (ORCID: https://orcid.org/0000-0001-9290-3634)
- Robert J. Macfarlane (ORCID: https://orcid.org/0000-0001-9449-2680)
- Thomas J. Wallin (ORCID: https://orcid.org/0000-0002-7867-0114)
- Nicholas S. Diaco (ORCID: https://orcid.org/0000-0001-8766-7075)
- Richard Bertram Church (ORCID: https://orcid.org/0000-0002-5235-0809)
- Carl J. Thrasher (ORCID: https://orcid.org/0000-0002-5074-293X)
- Hannah Agwunobi (ORCID: https://orcid.org/0009-0006-2141-7595)
- Raymond K. Lennon
- Derek de Jong
- A. John Hart
- Katherine K. Jankowski
- Lydia S. Jung
Institutions
- Massachusetts Institute of Technology (US)
Publication Details
- Journal
- ChemRxiv
- Published
- 2026-11-16
- DOI
- https://doi.org/10.26434/chemrxiv.15012259/v1
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- preprint