Chloroacetate Buffer-Modified SnO2 Electron Transport Layer for Efficient Perovskite Solar Cells
Tin oxide (SnO2) is a popular material for the electron transport layer (ETL) in perovskite solar cells (PSCs). However, the defects at the SnO2/perovskite interface tend to induce non-radiative recombination and deprotonation of formamidinium (FA+), limiting the device performance. Herein, a chloroacetate (CA) buffer system consisting of chloroacetic acid and its potassium salt was employed as a unique multifunctional interface modifier to synergistically engineer the SnO2 ETL/perovskite interface. The chloroacetate anion anchors to Sn and Pb sites, while the chloroacetic acid stabilizes FA+ through the hydrogen bond. As a result, the acidic buffer system suppresses FA+ deprotonation, enhances perovskite film quality, and improves carrier transport. Consequently, the CA buffer-modified PSC devices achieve a champion power conversion efficiency of 24.8%, considerably higher than 22.6% for the control devices. They also demonstrate prolonged dark-storage stability; particularly, the unencapsulated devices retain 99% of initial efficiency after 1500 h of ambient storage. This work shows that combining an organic acid and its conjugated base offers a facile yet effective strategy to simultaneously passivate the buried interface and stabilize perovskite components for efficient and stable PSCs.
Authors
- Limin Qi (ORCID: https://orcid.org/0000-0003-4959-6928)
- L Liu
Institutions
- Peking University (CN)
Publication Details
- Journal
- ACS Applied Materials & Interfaces
- Published
- 2026-11-16
- DOI
- https://doi.org/10.1021/acsami.6c20066
- Primary Topic
- Perovskite Materials and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- National Natural Science Foundation of China
- Ministry of Science and Technology of the People's Republic of China