Preparation and properties of high-dielectric-constant, heat-resistant boroxine-containing segmented copolyimides

Abstract Polyimide (PI) is widely used as dielectric materials in electronic devices and power systems because of its excellent heat resistance and mechanical stability. However, the intrinsically low dielectric constant of conventional PI limits its practical application in high-energy-density dielectric capacitors. In this study, triaminocycloboroxane (TABO) was first synthesized via dehydration condensation of 3-aminophenylboronic acid (3-ABBA). TABO was then reacted with 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) via an amine-anhydride ring-opening addition reaction to prepare a boron-containing hard-segment polyamic acid prepolymer, which designated as PAA-a. Separately, a soft-segment polyamic acid prepolymer, designated as PAA-b, was synthesized by reacting 4,4'-diaminodiphenyl ether (ODA) with 4,4'-oxydiphthalic dianhydride (ODPA) through the same method. PAA-a and PAA-b were coupled through ring-opening polyaddition to form a soft-hard segmented polyamic acid (PAA). The resulting PAA was cast into films, dried, and thermally imidized to obtain boroxine-containing PI films. The effects of the reactant ratio on soft-hard segmented structure, dielectric, thermal, wetting and mechanical properties of the PI films were studied. The results showed that raising the molar ratio of TABO to ODA, the hard-segment content of as-prepared PI films increased, and the dielectric and thermal properties were improved. When the molar ratio of TABO to ODA was 2:27, the PI film exhibited a high dielectric constant of 5.08 at 100 kHz and a maximum decomposition rate temperature of 630°C. These results demonstrate its potential as a high dielectric material for high-energy-density capacitors.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-16
DOI
https://doi.org/10.21203/rs.3.rs-11102148/v1
Primary Topic
Synthesis and properties of polymers
Type
preprint

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Preparation and properties of high-dielectric-constant, heat-resistant boroxine-containing segmented copolyimides

马海红, 周正发, 任凤梅, Xu Weibing et al.
2 links
Research Square
Synthesis and properties of polymers
preprint

Preparation and properties of high-dielectric-constant, heat-resistant boroxine-containing segmented copolyimides

马海红, 周正发, 任凤梅, Xu Weibing, Shengjie Ge, Xiang Zhang
preprint en

Abstract

Abstract Polyimide (PI) is widely used as dielectric materials in electronic devices and power systems because of its excellent heat resistance and mechanical stability. However, the intrinsically low dielectric constant of conventional PI limits its practical application in high-energy-density dielectric capacitors. In this study, triaminocycloboroxane (TABO) was first synthesized via dehydration condensation of 3-aminophenylboronic acid (3-ABBA). TABO was then reacted with 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) via an amine-anhydride ring-opening addition reaction to prepare a boron-containing hard-segment polyamic acid prepolymer, which designated as PAA-a. Separately, a soft-segment polyamic acid prepolymer, designated as PAA-b, was synthesized by reacting 4,4'-diaminodiphenyl ether (ODA) with 4,4'-oxydiphthalic dianhydride (ODPA) through the same method. PAA-a and PAA-b were coupled through ring-opening polyaddition to form a soft-hard segmented polyamic acid (PAA). The resulting PAA was cast into films, dried, and thermally imidized to obtain boroxine-containing PI films. The effects of the reactant ratio on soft-hard segmented structure, dielectric, thermal, wetting and mechanical properties of the PI films were studied. The results showed that raising the molar ratio of TABO to ODA, the hard-segment content of as-prepared PI films increased, and the dielectric and thermal properties were improved. When the molar ratio of TABO to ODA was 2:27, the PI film exhibited a high dielectric constant of 5.08 at 100 kHz and a maximum decomposition rate temperature of 630°C. These results demonstrate its potential as a high dielectric material for high-energy-density capacitors.

Research Square
Hefei University of Technology (CN)
Hefei University of Technology
Synthesis and properties of polymers
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon