Decoupling bond strength from interfacial adaptation in flowable dental composites: Fiber-reinforced semi-IPN versus polymerization-modulated UDMA

Polymer-matrix composites used in restorative dentistry rely on two distinct strategies to manage polymerization-induced stress: fiber reinforcement within a semi-interpenetrating polymer network (semi-IPN), and chemical modulation of polymerization kinetics in the pre-gel phase. Whether these architectures produce equivalent interfacial bond strength and interfacial adaptation is not well established. This study compared two commercially available flowable dimethacrylate composites, a short fiber-reinforced semi-IPN (EverX Flow) and a polymerization-modulated urethane dimethacrylate (SDR Flow+), using microtensile bond strength (µTBS) and scanning electron microscopy of interfacial gap formation after combined thermal cycling and cyclic mechanical aging. Sixty standardized cavities in extracted human molars were restored, aged for 10,000 thermal cycles (5–55 °C) and 10,000 mechanical load cycles, and evaluated for interfacial bond strength and dimensional adaptation. The fiber-reinforced semi-IPN produced significantly higher interfacial bond strength (38.18 ± 2.32 MPa vs 30.64 ± 4.14 MPa; P = 0.008; Cohen's d = 2.1), while the polymerization-modulated network produced significantly smaller interfacial gaps (4.97 ± 2.81 µm vs 9.81 ± 2.11 µm; P < 0.001; d = 1.9). Interfacial bond strength and interfacial dimensional stability were therefore decoupled between the two materials. Based on published data, this pattern is consistent with fiber-mediated crack arrest in the fiber-reinforced composite and with delayed gelation and reduced shrinkage stress in the polymerization-modulated composite; these mechanisms were not measured directly in this study. These findings have implications for the rational design of polymer-matrix composites where bond strength and interfacial adaptation must be balanced.

Authors

Publication Details

Journal
Next Materials
Published
2026-11-16
DOI
https://doi.org/10.1016/j.nxmate.2026.104049
Primary Topic
Dental materials and restorations
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Decoupling bond strength from interfacial adaptation in flowable dental composites: Fiber-reinforced semi-IPN versus polymerization-modulated UDMA

Pradeep Solete, Harish Selvaraj
Next Materials
Dental materials and restorations
article

Decoupling bond strength from interfacial adaptation in flowable dental composites: Fiber-reinforced semi-IPN versus polymerization-modulated UDMA

Pradeep Solete, Harish Selvaraj
article en

Abstract

Polymer-matrix composites used in restorative dentistry rely on two distinct strategies to manage polymerization-induced stress: fiber reinforcement within a semi-interpenetrating polymer network (semi-IPN), and chemical modulation of polymerization kinetics in the pre-gel phase. Whether these architectures produce equivalent interfacial bond strength and interfacial adaptation is not well established. This study compared two commercially available flowable dimethacrylate composites, a short fiber-reinforced semi-IPN (EverX Flow) and a polymerization-modulated urethane dimethacrylate (SDR Flow+), using microtensile bond strength (µTBS) and scanning electron microscopy of interfacial gap formation after combined thermal cycling and cyclic mechanical aging. Sixty standardized cavities in extracted human molars were restored, aged for 10,000 thermal cycles (5–55 °C) and 10,000 mechanical load cycles, and evaluated for interfacial bond strength and dimensional adaptation. The fiber-reinforced semi-IPN produced significantly higher interfacial bond strength (38.18 ± 2.32 MPa vs 30.64 ± 4.14 MPa; P = 0.008; Cohen's d = 2.1), while the polymerization-modulated network produced significantly smaller interfacial gaps (4.97 ± 2.81 µm vs 9.81 ± 2.11 µm; P < 0.001; d = 1.9). Interfacial bond strength and interfacial dimensional stability were therefore decoupled between the two materials. Based on published data, this pattern is consistent with fiber-mediated crack arrest in the fiber-reinforced composite and with delayed gelation and reduced shrinkage stress in the polymerization-modulated composite; these mechanisms were not measured directly in this study. These findings have implications for the rational design of polymer-matrix composites where bond strength and interfacial adaptation must be balanced.

Next MaterialsVol. 14
Dental materials and restorations
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon