Investigation of single-event burnout mechanism in p-GaN gate HEMTs

In this work, the mechanism of single-event burnout (SEB) in p-GaN gate HEMTs is thoroughly investigated by irradiation experiments and simulations. The samples were irradiated with tantalum (Ta) ions (67 MeV cm2/mg in GaN). There are two distinct failure modes observed in samples occurring in SEB. One is the four-terminal short-circuit mode, and the other is the vertical short-circuit mode between the drain and the substrate. By comparing damaged structures, it can be inferred that both failure modes probably originated from the burnout of the drain. According to the transient currents and temperature distributions by simulations, it is found that the most sensitive region to SEB is the edge of the drain, rather than the edge of the gate or field plate. The SEB mechanism can be explained as follows. A large number of generated holes accumulate at the GaN/AlN interface, while a large number of electrons will accumulate at the Si-Sub/AlN interface, leading to a high electric field in the AlN layer and in turn enhancing the impact ionization. Then the generated electrons will drift to the drain and concentrate around the drain, which produces high current density as well as a high electric field near the drain. Therefore, the lattice temperature there is quickly raised to trigger thermal runaway at the drain.

Authors

Institutions

Publication Details

Journal
Applied Physics Letters
Published
2026-11-16
DOI
https://doi.org/10.1063/5.0345096
Primary Topic
Radiation Effects in Electronics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Investigation of single-event burnout mechanism in p-GaN gate HEMTs

Zhimei Yang, Qimeng Jiang, Mingmin Huang, Dongyang Wang et al.
6 links
Applied Physics Letters
Radiation Effects in Electronics
article

Investigation of single-event burnout mechanism in p-GaN gate HEMTs

Zhimei Yang, Qimeng Jiang, Mingmin Huang, Dongyang Wang, Min Gong, Yao Ma, Yun Li
article en

Abstract

In this work, the mechanism of single-event burnout (SEB) in p-GaN gate HEMTs is thoroughly investigated by irradiation experiments and simulations. The samples were irradiated with tantalum (Ta) ions (67 MeV cm2/mg in GaN). There are two distinct failure modes observed in samples occurring in SEB. One is the four-terminal short-circuit mode, and the other is the vertical short-circuit mode between the drain and the substrate. By comparing damaged structures, it can be inferred that both failure modes probably originated from the burnout of the drain. According to the transient currents and temperature distributions by simulations, it is found that the most sensitive region to SEB is the edge of the drain, rather than the edge of the gate or field plate. The SEB mechanism can be explained as follows. A large number of generated holes accumulate at the GaN/AlN interface, while a large number of electrons will accumulate at the Si-Sub/AlN interface, leading to a high electric field in the AlN layer and in turn enhancing the impact ionization. Then the generated electrons will drift to the drain and concentrate around the drain, which produces high current density as well as a high electric field near the drain. Therefore, the lattice temperature there is quickly raised to trigger thermal runaway at the drain.

Applied Physics LettersVol. 129(20)
Sichuan University (CN), Southwest Jiaotong University (CN)
Radiation Effects in Electronics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon