Design, Implementation and Experimental Validation of a Low – Cost Modular Electrical Power Subsystem EPS of a CubeSat Flight Demonstrator

Electrical Power Systems formerly EPS are fundamental for the CubeSats operation as they must generate, store, regulate, condition and distribute electrical energy to avionics, communication systems, sensor modules and associated payloads under constrained power generation and energy storage conditions. This work presents the actual design, implementation and experimental characterization of a low-cost, modular, functional Electrical Power Subsystem EPS that is developed for a prototype level CubeSat Flight Demonstrator. The developed prototype uses six 5V, 200mA, 1 W photovoltaic panels that are arranged in 3S2P(3 in series and then both series connection in parallel) configuration, an 8-cell 4S2P lithium-ion battery pack, a 4S 40 A Battery Management System, a XL6009 boost with LED display for external charging and a fixed 5V LM2596 regulation and distribution step. The output of this regulation supplies a Raspberry Pi 5-based imaging and receiving subsystem and an ESP 32-based communication and sensing subsystem comprising of GPS, LoRa module, inertial sensing, analog data acquisition and environmental behavioural factors sensing. Despite of purely simulation-based EPS study, the proposed work focuses deeply on hardware implementation and experimental characterization of the complete Power Path from Source – to – Load. Evaluation of the experimental methodology incorporates solar-array characteristics, battery charging and discharge behaviour, power regulation and distribution, converter performance, power consumption of subsystem and battery-supported operation under eclipse conditions. Measured Voltage, Current, Power, Energy and operating time are used to establish the actual power budget and balance energy of this demonstrator. The study also establishes the limitations associated with the use of non – space qualified commercial components and battery cells that are locally manufactured. The resulting system is designated as a laboratory-scale technology demonstrator rather than a flight-qualified space EPS. The study provides a reproducible methodology for the evaluation of COTS-based EPS architectures and demonstrates how subsystem demand measured experimentally can be used to access battery endurance, power margins and eclipse operation in CubeSat Development.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-16
DOI
https://doi.org/10.5281/zenodo.24269630
Primary Topic
Spacecraft Design and Technology
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design, Implementation and Experimental Validation of a Low – Cost Modular Electrical Power Subsystem EPS of a CubeSat Flight Demonstrator

Mudassir Imran
3 links
Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Design and Technology
article

Design, Implementation and Experimental Validation of a Low – Cost Modular Electrical Power Subsystem EPS of a CubeSat Flight Demonstrator

Mudassir Imran
article en

Abstract

Electrical Power Systems formerly EPS are fundamental for the CubeSats operation as they must generate, store, regulate, condition and distribute electrical energy to avionics, communication systems, sensor modules and associated payloads under constrained power generation and energy storage conditions. This work presents the actual design, implementation and experimental characterization of a low-cost, modular, functional Electrical Power Subsystem EPS that is developed for a prototype level CubeSat Flight Demonstrator. The developed prototype uses six 5V, 200mA, 1 W photovoltaic panels that are arranged in 3S2P(3 in series and then both series connection in parallel) configuration, an 8-cell 4S2P lithium-ion battery pack, a 4S 40 A Battery Management System, a XL6009 boost with LED display for external charging and a fixed 5V LM2596 regulation and distribution step. The output of this regulation supplies a Raspberry Pi 5-based imaging and receiving subsystem and an ESP 32-based communication and sensing subsystem comprising of GPS, LoRa module, inertial sensing, analog data acquisition and environmental behavioural factors sensing. Despite of purely simulation-based EPS study, the proposed work focuses deeply on hardware implementation and experimental characterization of the complete Power Path from Source – to – Load. Evaluation of the experimental methodology incorporates solar-array characteristics, battery charging and discharge behaviour, power regulation and distribution, converter performance, power consumption of subsystem and battery-supported operation under eclipse conditions. Measured Voltage, Current, Power, Energy and operating time are used to establish the actual power budget and balance energy of this demonstrator. The study also establishes the limitations associated with the use of non – space qualified commercial components and battery cells that are locally manufactured. The resulting system is designated as a laboratory-scale technology demonstrator rather than a flight-qualified space EPS. The study provides a reproducible methodology for the evaluation of COTS-based EPS architectures and demonstrates how subsystem demand measured experimentally can be used to access battery endurance, power margins and eclipse operation in CubeSat Development.

Zenodo (CERN European Organization for Nuclear Research)
Affordable and clean energy, Industry, innovation and infrastructure
Spacecraft Design and Technology
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon