p+-i-p+ Type poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno(3,2-b)thiophene) transistors fabricated via transfer printing and anion-exchange doping

A fabrication strategy for p + -i- p + type organic thin-film transistors (OTFTs) with various contact configurations has been presented. The p + -i- p + type transistors feature highly doped ( p + ) layers as the source and drain (S-D) regions and an undoped intrinsic (i) layer as the active layer, both of which are composed of the same hole-transporting material. In this study, poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno(3,2-b)thiophene) (PBTTT) was employed as the host material, and p + -i- p + type OTFTs with both bottom-gate/bottom-contact (BGBC) and bottom-gate/top-contact (BGTC) configurations were fabricated onto CYTOP-coated SiO 2 gate insulators via transfer printing using elastomer stamps. The S-D p + layers were prepared by immersion doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) as well as anion-exchange doping. A new doping process combining anion-exchange doping with stamp-assisted transfer allows fabrication of BGTC p + -i- p + type OTFTs, which are difficult to realize using conventional methods. The resulting BGTC transistors exhibited enhanced low-field mobility in the channel and reduced contact resistance compared to the BGBC p + -i- p + type devices. This improvement occurs because the active semiconductor layer (i layer) for BGTC devices can be thermally annealed to improve its crystallinity, whereas the i layer in BGBC OTFTs cannot be annealed because of the deterioration risk of the pre-deposited p + layers. This study suggests a novel and versatile approach to device fabrication based on organic multilayers using cost-effective, solution-based processes.

Authors

Institutions

Publication Details

Journal
Materials Science in Semiconductor Processing
Published
2026-11-16
DOI
https://doi.org/10.1016/j.mssp.2026.111409
Primary Topic
Organic Electronics and Photovoltaics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

p+-i-p+ Type poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno(3,2-b)thiophene) transistors fabricated via transfer printing and anion-exchange doping

Kei Noda, Kazuki Takayama, Yuichi Nakajima, Hyuji Akutagawa
1 links
Materials Science in Semiconductor Processing
Organic Electronics and Photovoltaics
article

p+-i-p+ Type poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno(3,2-b)thiophene) transistors fabricated via transfer printing and anion-exchange doping

Kei Noda, Kazuki Takayama, Yuichi Nakajima, Hyuji Akutagawa
article en

Abstract

A fabrication strategy for p + -i- p + type organic thin-film transistors (OTFTs) with various contact configurations has been presented. The p + -i- p + type transistors feature highly doped ( p + ) layers as the source and drain (S-D) regions and an undoped intrinsic (i) layer as the active layer, both of which are composed of the same hole-transporting material. In this study, poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno(3,2-b)thiophene) (PBTTT) was employed as the host material, and p + -i- p + type OTFTs with both bottom-gate/bottom-contact (BGBC) and bottom-gate/top-contact (BGTC) configurations were fabricated onto CYTOP-coated SiO 2 gate insulators via transfer printing using elastomer stamps. The S-D p + layers were prepared by immersion doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) as well as anion-exchange doping. A new doping process combining anion-exchange doping with stamp-assisted transfer allows fabrication of BGTC p + -i- p + type OTFTs, which are difficult to realize using conventional methods. The resulting BGTC transistors exhibited enhanced low-field mobility in the channel and reduced contact resistance compared to the BGBC p + -i- p + type devices. This improvement occurs because the active semiconductor layer (i layer) for BGTC devices can be thermally annealed to improve its crystallinity, whereas the i layer in BGBC OTFTs cannot be annealed because of the deterioration risk of the pre-deposited p + layers. This study suggests a novel and versatile approach to device fabrication based on organic multilayers using cost-effective, solution-based processes.

Materials Science in Semiconductor ProcessingVol. 219
Keio University (JP)
Japan Society for the Promotion of Science
Organic Electronics and Photovoltaics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon