Wearable Printed Heaters: Evaluations of Novel Garments Used in High-Performance Sport

Post-warm-up heat-loss windows are common in competitive sporting environments. Heated garments are sometimes used to attenuate these losses, but their benefits can be affected by technological and garment design limitations, including local hotspots/non-uniform heating. This three-part study aimed to evaluate the performance of new heated garments (jackets and trousers) comprising nanocarbon-ink-printed panels, as worn by elite British athletes at the highest level of international competition. Firstly, the off-person performance of the garment was evaluated using infrared thermal imaging. Secondly, the effect of garment use on skin surface temperatures during 30 min of rest was evaluated using infrared thermal images of six recreationally active participants in an environmental chamber. Finally, nine healthy, recreationally active males completed a four-condition experiment to determine the effect of the novel heated garment use after a cycling warm-up on countermovement jump (CMJ) peak power output (PPO) in both cold (5°C) and temperate (20°C) conditions. Mean surface temperatures were 47.0 ± 0.9°C across all trouser and 42.7 ± 5.8°C across all jacket panels, with local maxima of 55.4 ± 1.3°C and 53.8 ± 3.2°C, respectively. Average body surface temperature significantly differed by 0.98°C to 3.96°C between the heating-enabled and control conditions for all heated regions (quadriceps, hamstrings, gluteals, biceps, triceps, back), except the chest. Garment use during the experimental post-warm-up protocol led to increased skin but not core temperature in both cold and temperate conditions, and CMJ PPO was significantly greater in the heated condition compared with the control condition at the end of the post-warm-up period in the cold but not temperate conditions. These novel nanocarbon-ink-printed heater garments provide a relatively uniform heat source over specific desired areas that leads to an increase in skin temperature. There was an improvement in post-warm-up CMJ PPO when using the heated garments in cold conditions, but further design considerations are likely required to enhance their efficacy in temperate conditions.

Authors

Institutions

Publication Details

Journal
Sensors
Published
2026-11-18
DOI
https://doi.org/10.3390/s26227275
Primary Topic
Thermoregulation and physiological responses
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Wearable Printed Heaters: Evaluations of Novel Garments Used in High-Performance Sport

Louise Burnie, Henry Parry, Mark Waldron, Cunningham Dan et al.
Sensors
Thermoregulation and physiological responses
article

Wearable Printed Heaters: Evaluations of Novel Garments Used in High-Performance Sport

Louise Burnie, Henry Parry, Mark Waldron, Cunningham Dan, James Claypole, Neil Edward Bezodis, Andrew Claypole, Timothy Claypole, Liam Kilduff, Jonathan Leeder, Fiona Johnson, Matt Parker
article en

Abstract

Post-warm-up heat-loss windows are common in competitive sporting environments. Heated garments are sometimes used to attenuate these losses, but their benefits can be affected by technological and garment design limitations, including local hotspots/non-uniform heating. This three-part study aimed to evaluate the performance of new heated garments (jackets and trousers) comprising nanocarbon-ink-printed panels, as worn by elite British athletes at the highest level of international competition. Firstly, the off-person performance of the garment was evaluated using infrared thermal imaging. Secondly, the effect of garment use on skin surface temperatures during 30 min of rest was evaluated using infrared thermal images of six recreationally active participants in an environmental chamber. Finally, nine healthy, recreationally active males completed a four-condition experiment to determine the effect of the novel heated garment use after a cycling warm-up on countermovement jump (CMJ) peak power output (PPO) in both cold (5°C) and temperate (20°C) conditions. Mean surface temperatures were 47.0 ± 0.9°C across all trouser and 42.7 ± 5.8°C across all jacket panels, with local maxima of 55.4 ± 1.3°C and 53.8 ± 3.2°C, respectively. Average body surface temperature significantly differed by 0.98°C to 3.96°C between the heating-enabled and control conditions for all heated regions (quadriceps, hamstrings, gluteals, biceps, triceps, back), except the chest. Garment use during the experimental post-warm-up protocol led to increased skin but not core temperature in both cold and temperate conditions, and CMJ PPO was significantly greater in the heated condition compared with the control condition at the end of the post-warm-up period in the cold but not temperate conditions. These novel nanocarbon-ink-printed heater garments provide a relatively uniform heat source over specific desired areas that leads to an increase in skin temperature. There was an improvement in post-warm-up CMJ PPO when using the heated garments in cold conditions, but further design considerations are likely required to enhance their efficacy in temperate conditions.

SensorsVol. 26(22)
English Institute of Sport (GB), Northumbria University (GB), Swansea University (GB), Sport Wales (GB), Welsh Centre for Printing and Coating (GB)
Llywodraeth Cymru, English Institute of Sport
Good health and well-being
Thermoregulation and physiological responses
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon