Utilizing numerical modeling to optimize lead-free double perovskite solar cells based on Cs2PtI6 and Rb2PtI6 with graded bandgaps for enhanced photovoltaic performance and thermal response
Abstract Lead-free vacancy-ordered double perovskites have emerged as promising absorber materials to overcome the toxicity and stability limitations of conventional lead-based perovskite solar cells (PSCs). This study presents a rigorous numerical investigation and comparative optimization of Cs 2 PtI 6 and Rb 2 PtI 6 absorbers using the SCAPS-1D simulator. A total of 18 device architectures were modeled by systematically combining electron transport layers (ETLs: ZnSe, Nb 2 O 5 , Ag 2 S) and hole transport layers (HTLs: CuI, Mg-CuCrO 2 , GO- Graphene Oxide). The optimal FTO/ZnSe/Perovskite/CuI/Au configuration yielded baseline power conversion efficiencies of 20.96% for Rb 2 PtI 6 (V oc = 0.843 V, J sc = 34.97 mA/cm 2 , FF = 71.10%) and 20.29% for Cs 2 PtI 6 (V oc = 1.111 V, J sc = 28.41 mA/cm 2 , FF = 64.29%). The Rb 2 PtI 6 -based cell demonstrated superior charge extraction through higher current density and fill factor, whereas the Cs 2 PtI 6 -based cell achieved a higher open-circuit voltage. Quantum efficiency analysis revealed broad spectral response from 300–900 nm for both absorbers, with Rb 2 PtI 6 showing enhanced near-infrared absorption contributing to its higher J sc . Bandgap grading of the absorber layer (1.2–2.0 eV) substantially enhanced carrier dynamics. Achieving peak efficiencies of 22.67% (Rb 2 PtI 6 ) and 24.35% (Cs 2 PtI 6 ) demonstrates the substantial benefits of bandgap engineering for enhancing photovoltaic performance. Furthermore, thermal stability analysis within 300–350 K showed minimal efficiency losses, with both structures maintaining excellent operational resilience under elevated temperatures. The comparative analysis reveals that Rb 2 PtI 6 exhibits superior charge transport characteristics, while Cs 2 PtI 6 delivers higher open-circuit voltage and more pronounced efficiency improvements through bandgap grading. By integrating optimal transport layer selection, defect management strategies, and bandgap engineering, this study establishes a comprehensive framework for designing high-performance lead-free perovskite solar cells. These findings offer valuable guidance for the experimental development of environmentally sustainable next-generation photovoltaic technologies.
Authors
- Nahid Al Mahmud (ORCID: https://orcid.org/0000-0001-7065-2926)
- Farhana Bari Sumona (ORCID: https://orcid.org/0009-0008-9862-1054)
Institutions
- Tianjin University (CN)
Publication Details
- Journal
- Discover Electronics
- Published
- 2026-11-15
- DOI
- https://doi.org/10.1007/s44291-026-00316-6
- Primary Topic
- Perovskite Materials and Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00