Strength–stiffness coupling mechanism governing grout‐rock interface performance and anchorage capacity

Abstract Interfacial shear strength ( τ p ) and shear stiffness ( k s ) at the grout‐rock interface (GRI) are key parameters governing load transfer and pull‐out resistance of fully grouted rock bolts. This study systematically investigates the shear behavior of the GRI under four grout material conditions, namely early high‐strength cement (EHC), EHC with 5% silica fume (SF), EHC with 10% styrene‐acrylate emulsion (SA), and EHC with 20% SA. Direct shear tests combined with digital image correlation (DIC) are conducted to characterize the macroscopic shear response and localized deformation of the interfaces. (1) The direct shear tests show that the incorporation of SF increases τ p from 7.7 to 9.1 MPa and k s from 15.5 to 22.5 GPa/m, whereas the addition of SA reduces these parameters to 7.3 MPa and 10.5 GPa/m at 10% SA and further to 5.7 MPa and 5.7 GPa/m at 20% SA; (2) The DIC results reveal that interfacial shear stiffness is closely associated with the extent of the localized deformation on the grout side. The deformation‐zone thickness decreases from 2.5 mm for EHC to 1.5 mm for EHC with 5% SF, but increases to 4.0 and 5.0 mm for EHC with 10% and 20% SA, respectively. A stiffer grout therefore results in stronger deformation localization and a higher k s , whereas a more deformable grout broadens the shear zone and reduces k s . (3) An analytical model is subsequently developed to evaluate the coupled effects of τ p and k s on the GRI‐controlled anchorage capacity. The results demonstrate that increasing interfacial strength or appropriately reducing interfacial stiffness can enhance pull‐out resistance, whereas excessive strength degradation offsets the beneficial effect of stiffness reduction. These findings provide a mechanistic basis for optimizing grout materials through a coordinated control of interfacial strength and stiffness.

Authors

Institutions

Publication Details

Journal
Deep Underground Science and Engineering
Published
2026-11-15
DOI
https://doi.org/10.1002/dug2.70140
Primary Topic
Grouting, Rheology, and Soil Mechanics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Strength–stiffness coupling mechanism governing grout‐rock interface performance and anchorage capacity

Tian Hongming, Xiaoyun Shu, Dongfang Liang, Xingsen Guo et al.
Deep Underground Science and Engineering
Grouting, Rheology, and Soil Mechanics
article

Strength–stiffness coupling mechanism governing grout‐rock interface performance and anchorage capacity

Tian Hongming, Xiaoyun Shu, Dongfang Liang, Xingsen Guo, Xuejian Chen, Xin Qiu
article en

Abstract

Abstract Interfacial shear strength ( τ p ) and shear stiffness ( k s ) at the grout‐rock interface (GRI) are key parameters governing load transfer and pull‐out resistance of fully grouted rock bolts. This study systematically investigates the shear behavior of the GRI under four grout material conditions, namely early high‐strength cement (EHC), EHC with 5% silica fume (SF), EHC with 10% styrene‐acrylate emulsion (SA), and EHC with 20% SA. Direct shear tests combined with digital image correlation (DIC) are conducted to characterize the macroscopic shear response and localized deformation of the interfaces. (1) The direct shear tests show that the incorporation of SF increases τ p from 7.7 to 9.1 MPa and k s from 15.5 to 22.5 GPa/m, whereas the addition of SA reduces these parameters to 7.3 MPa and 10.5 GPa/m at 10% SA and further to 5.7 MPa and 5.7 GPa/m at 20% SA; (2) The DIC results reveal that interfacial shear stiffness is closely associated with the extent of the localized deformation on the grout side. The deformation‐zone thickness decreases from 2.5 mm for EHC to 1.5 mm for EHC with 5% SF, but increases to 4.0 and 5.0 mm for EHC with 10% and 20% SA, respectively. A stiffer grout therefore results in stronger deformation localization and a higher k s , whereas a more deformable grout broadens the shear zone and reduces k s . (3) An analytical model is subsequently developed to evaluate the coupled effects of τ p and k s on the GRI‐controlled anchorage capacity. The results demonstrate that increasing interfacial strength or appropriately reducing interfacial stiffness can enhance pull‐out resistance, whereas excessive strength degradation offsets the beneficial effect of stiffness reduction. These findings provide a mechanistic basis for optimizing grout materials through a coordinated control of interfacial strength and stiffness.

Deep Underground Science and Engineering
New York University Abu Dhabi (AE), Hohai University (CN), Chinese Academy of Sciences (CN), University of Cambridge (GB), Institute of Rock and Soil Mechanics (CN), State Key Laboratory of Geomechanics and Geotechnical Engineering (CN), University College London (GB), Ocean University of China (CN)
Grouting, Rheology, and Soil Mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon