Comparative Vickers Microindentation Hardness Evaluation of Organic-Based, Semi-Metallic and Ceramic-Based Automobile Brake Pad Friction Materials
This study presents a systematic comparative evaluation of Vickers microindentation hardness for three categories of automobile brake pad friction materials: organic-based, semi-metallic and ceramic-based. Specimens were tested under a standardised load of 1 kgf using a diamond pyramid indenter. Mean diagonal lengths of indentations were measured and converted to Vickers hardness numbers (HV) according to HV = 1.8544 × F / d². Six indentations were performed per material category. Descriptive statistics, coefficients of variation, one-way ANOVA, Kruskal–Wallis tests and pairwise Welch t-tests were applied. Semi-metallic materials exhibited the highest mean hardness (54.50 HV), followed by ceramic-based (47.50 HV) and organic-based (35.00 HV). Coefficients of variation remained low (3.89–4.47 %). Indentation-level ANOVA indicated differences among the measured readings (F = 195.17, p = 1.83 × 10⁻¹¹); these tests are exploratory because indentations are nested within two specimens per category. The ranking is consistent with the expected contribution of metallic and ceramic reinforcements. Hardness alone does not determine friction coefficient, wear rate or fade resistance; the quantified differences nevertheless provide a reproducible baseline for material selection and quality control.
Authors
- Aregbe Olorunleke
- Lucky Olatunde ODEJIMI
- Gbenga Joseph Ajayi
Institutions
- Igbinedion University (NG)
Publication Details
- Published
- 2026-11-15
- DOI
- https://doi.org/10.54117/w7eq5570
- Primary Topic
- Brake Systems and Friction Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00