Reduced-order aerodynamic modelling of a lift-plus-cruise VTOL UAV: flight-envelope assessment and load-conserving reconstruction

A traceable reduced-order design workflow is developed for a 13.85 kg lift-plus-cruise vertical take-off and landing (VTOL) unmanned aerial vehicle (UAV). The novelty is a verification architecture – not a new lifting-line relation – that couples archived-data reconciliation, flight-envelope falsification, bounded uncertainty and exact load closure in one reduced-order chain. Thin-airfoil theory and a 20-term Prandtl lifting-line solution are coupled with a bounded parasite-drag scenario, an explicit stall-margin feasibility index, and force-conserving reconstruction of distributed lift, shear force and bending moment. A legacy circulation dataset is an unpublished higher-fidelity numerical distribution retained in the authors’ design archive. Because its original solver settings, speed, density and dimensional force scaling cannot be recovered, it is treated as the available full-order model (FOM) benchmark only for integral-normalized spanwise-shape comparison, not as physical validation. The model predicts a zero-lift angle of –1.92°, a finite-wing lift-curve slope of 0.0903 deg - 1 and a span efficiency factor of 0.977. The nominal maximum lift-to-drag ratio is 16.5, with a bounded scenario range of 15.2-18.2. Relative to the archived benchmark, the reduced-order model (ROM) gives an RMSE of 0.1215, a range-normalized RMSE of 10.1 % and a maximum pointwise normalized deviation of 21.2 % for circulation shape. These are shape errors only and do not establish the absolute accuracy of lift, drag or load magnitudes. Most importantly, the archived 36 km/h wing-borne condition is falsified because it requires lift coefficients of 3.89 at sea level and 5.24 at 3000 m. At 3000 m, even 90 km/h is only statically feasible and does not retain the selected 30 % stall-speed margin; the protected minimum is 97.8 km/h. At a design load factor of 2.5, the reconstructed half-wing root shear and bending moment are 169.8 N and 91.9 N·m. The workflow therefore provides a reproducible screening and load-transfer baseline while explicitly identifying the experiments required for physical validation.

Authors

Publication Details

Journal
Mathematical Models in Engineering
Published
2026-11-15
DOI
https://doi.org/10.21595/mme.2026.26926
Primary Topic
Aerospace and Aviation Technology
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Reduced-order aerodynamic modelling of a lift-plus-cruise VTOL UAV: flight-envelope assessment and load-conserving reconstruction

Jonibek Takhirov, Nuriddin Abdujabarov
Mathematical Models in Engineering
Aerospace and Aviation Technology
article

Reduced-order aerodynamic modelling of a lift-plus-cruise VTOL UAV: flight-envelope assessment and load-conserving reconstruction

Jonibek Takhirov, Nuriddin Abdujabarov
article en

Abstract

A traceable reduced-order design workflow is developed for a 13.85 kg lift-plus-cruise vertical take-off and landing (VTOL) unmanned aerial vehicle (UAV). The novelty is a verification architecture – not a new lifting-line relation – that couples archived-data reconciliation, flight-envelope falsification, bounded uncertainty and exact load closure in one reduced-order chain. Thin-airfoil theory and a 20-term Prandtl lifting-line solution are coupled with a bounded parasite-drag scenario, an explicit stall-margin feasibility index, and force-conserving reconstruction of distributed lift, shear force and bending moment. A legacy circulation dataset is an unpublished higher-fidelity numerical distribution retained in the authors’ design archive. Because its original solver settings, speed, density and dimensional force scaling cannot be recovered, it is treated as the available full-order model (FOM) benchmark only for integral-normalized spanwise-shape comparison, not as physical validation. The model predicts a zero-lift angle of –1.92°, a finite-wing lift-curve slope of 0.0903 deg - 1 and a span efficiency factor of 0.977. The nominal maximum lift-to-drag ratio is 16.5, with a bounded scenario range of 15.2-18.2. Relative to the archived benchmark, the reduced-order model (ROM) gives an RMSE of 0.1215, a range-normalized RMSE of 10.1 % and a maximum pointwise normalized deviation of 21.2 % for circulation shape. These are shape errors only and do not establish the absolute accuracy of lift, drag or load magnitudes. Most importantly, the archived 36 km/h wing-borne condition is falsified because it requires lift coefficients of 3.89 at sea level and 5.24 at 3000 m. At 3000 m, even 90 km/h is only statically feasible and does not retain the selected 30 % stall-speed margin; the protected minimum is 97.8 km/h. At a design load factor of 2.5, the reconstructed half-wing root shear and bending moment are 169.8 N and 91.9 N·m. The workflow therefore provides a reproducible screening and load-transfer baseline while explicitly identifying the experiments required for physical validation.

Mathematical Models in Engineering
Aerospace and Aviation Technology
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Reduced-order aerodynamic modelling of a lift-plus-cruise VTOL UAV: flight-envelope assessment and load-conserving reconstruction — Jonibek Takhirov, Nuriddin Abdujabarov · Mathematical Models in Engineering (2026) | TGRS Research Map | TGRS