Hydrokinetic River Turbine on a Moored Pontoon: Stream Power, Rotor Loading and Mooring Budgets for a 16 Kilowatt Plant
This paper presents a computed design for a horizontal-axis rotor carried under a moored pontoon at a deep, steady reach of a large river, operating on the following principle: no dam and no head are used at all: the rotor extracts kinetic energy directly from the river's current, exactly as a wind turbine extracts it from moving air, and a mooring system holds the supporting pontoon against the rotor's thrust. The current carries 48.3 kilowatts through the rotor disc; at a power coefficient of 0.38 the plant delivers 16.4 kilowatts net, the rotor thrust of 18.68 kilonewtons sizes the mooring, and annual output reaches about 0.103 gigawatt-hours. Hydrokinetic generation is the only approach in this set that builds nothing across the river: no weir, no intake, no fish pass, because there is no barrier. The price is the cubic law: power follows the cube of current speed, so site selection is destiny and a half-metre-per-second difference in current changes output by the better part of a factor of two. This study works the stream-power, rotor-loading and thrust budgets for a pontoon-mounted unit in a deep reach. All sizing follows from computed head, flow, turbine-efficiency, cavitation and, where the design stores energy, storage budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian electricity production; it is simulated, not measured, and no part of it concerns any weapon or targeting application.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24242894
- Primary Topic
- Wind Energy Research and Development
- Type
- article
- Field-Weighted Citation Impact
- 0.00