A Single-Station On-Site P-Wave Warning Unit for an Industrial Facility: Threshold, Decision Window and Shut-Down Budgets
One rugged three-component sensor in a plant's utility yard watches its own ground motion, estimates from the first three seconds of the P wave whether the coming S shaking will exceed the plant's damage threshold, and trips valves, burners and cranes without waiting for any regional network. Its operating principle: a lone on-site sensor that reads the opening seconds of its own P wave and acts before the S wave reaches the same building. Headline values are onsite p travel onsite to nearest station onsite s = 8.57; onsite detection latency onsite s = 11.62; onsite total alert onsite latency s = 12.82; onsite blind zone onsite radius km = 43.24; onsite warning time onsite at 50 km onsite s = 1.871; onsite warning time onsite at 100 km onsite s = 15.96. With one sensor there is no voting geometry to report; the entries instead expose the threshold trade between acting early and acting wrongly. SIMULATED, NOT MEASURED. Computed for the protection of workers and neighbours at one industrial site, this study is not a targeting device and carries no weapon application against any individual, government or earthly object.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-16
- DOI
- https://doi.org/10.5281/zenodo.24265414
- Primary Topic
- Seismology and Earthquake Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00