Cavitation Inside a Diesel Injector Nozzle: Velocity, Sigma and Discharge-Coefficient Budgets
Cavitation inside a diesel injector nozzle is examined for a single hole of a common-rail diesel injector, 0.14 millimetres in diameter, injecting at a rail pressure of 1600 bar into a cylinder back pressure of 60 bar. Principal computed quantities: bernoulli velocity m s = 605.5; cavitation number K = 1.039; hole area um2 = 15,393.8; mass flow g s = 5.638; volume flow mm3 per ms = 6.71 times ten to the -3; reynolds number = 23,736.8. The governing idea, for single hole of common-rail diesel injector, runs as follows. The flow turning into the nozzle hole separates at the inlet corner, the vena contracta pressure falls toward the fuel's vapour pressure, and the resulting cavitation, while erosive over long service, also aids primary atomisation; the discharge coefficient records how much of the hole the vapour has taken from the fuel. Setting bernoulli velocity m s at 605.5 beside cavitation number K at 1.039 shows, for single hole of common-rail diesel injector, the scale, for single hole of common-rail diesel injector, before interpretation. Both numbers, for single hole of common-rail diesel injector, come from the cavitation inside a diesel injector nozzle relations. The later discussion, for single hole of common-rail diesel injector, sets bernoulli velocity m s at 605.5 against published values for single hole of common-rail diesel injector and names, for single hole of common-rail diesel injector, the input moving bernoulli velocity m s at 605.5 furthest.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238106
- Primary Topic
- Cavitation Phenomena in Pumps
- Type
- article
- Field-Weighted Citation Impact
- 0.00