Facet-dependent anion adsorption for electrolyte-Cu interfacial stability in initially anode-free Li-metal batteries

Initially anode-free Li-metal batteries, in which Li-metal is constructed in-situ during charging, enable increased energy density. However, interfacial degradation reactions between the electrolyte and lithiophobic Cu prevent stable solid electrolyte interphase formation on the negative electrode. Here, we elucidate a time-evolving interfacial mechanism in which adsorption of electrolyte components contributes to initial interfacial layer formation and solid electrolyte interphase stability. Most organic solvents adsorb more strongly than Li-salt compounds on Cu through van der Waals dispersion interactions. This preferential adsorption produces a solvent-dominated interfacial layer that undergoes rapid compositional reconstruction during Cu oxide reduction upon initial charging. In contrast, lithium tetrafluoroborate possesses a tetrahedral anion with isotropic charge distribution that binds strongly to the Cu (111)/(100) surfaces and native Cu oxides, producing a tetrafluoroborate-driven interfacial layer that electronically passivates the Cu interface and promotes homogeneous Li nucleation. Consequently, lithium tetrafluoroborate-containing cells achieve 62% capacity retention after 300 cycles at an areal capacity of 4.1 mAh cm−2 and electrolyte conditions of 1.5 g Ah−1 and 4 μL cm−2, establishing a mechanistic basis for adsorption-driven interfacial design in initially anode-free Li-metal batteries. Initially anode-free lithium-metal batteries are limited by unstable interfacial reactions at Cu current collectors. Here, authors show that preferential anion adsorption can stabilize the copper interface and improve long-term cycling.

Authors

Institutions

Publication Details

Journal
Nature Communications
Published
2026-11-15
DOI
https://doi.org/10.1038/s41467-026-79429-1
Primary Topic
Advanced Battery Materials and Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Facet-dependent anion adsorption for electrolyte-Cu interfacial stability in initially anode-free Li-metal batteries

Rama Krishnan Vasudevan, Hee‐Tak Kim, Sang Woo Han, Jeesoo Park et al.
Nature Communications
Advanced Battery Materials and Technologies
article

Facet-dependent anion adsorption for electrolyte-Cu interfacial stability in initially anode-free Li-metal batteries

Rama Krishnan Vasudevan, Hee‐Tak Kim, Sang Woo Han, Jeesoo Park, Seungbum Hong, Nam‐Soon Choi, Y.-H. Cho, Hyeokjin Kwon, J. W. LEE, Minju Song, Sejin Kim, Hyeon Jeong Kim, Dongwoo Kim, Chaeyeong Nam
article en

Abstract

Initially anode-free Li-metal batteries, in which Li-metal is constructed in-situ during charging, enable increased energy density. However, interfacial degradation reactions between the electrolyte and lithiophobic Cu prevent stable solid electrolyte interphase formation on the negative electrode. Here, we elucidate a time-evolving interfacial mechanism in which adsorption of electrolyte components contributes to initial interfacial layer formation and solid electrolyte interphase stability. Most organic solvents adsorb more strongly than Li-salt compounds on Cu through van der Waals dispersion interactions. This preferential adsorption produces a solvent-dominated interfacial layer that undergoes rapid compositional reconstruction during Cu oxide reduction upon initial charging. In contrast, lithium tetrafluoroborate possesses a tetrahedral anion with isotropic charge distribution that binds strongly to the Cu (111)/(100) surfaces and native Cu oxides, producing a tetrafluoroborate-driven interfacial layer that electronically passivates the Cu interface and promotes homogeneous Li nucleation. Consequently, lithium tetrafluoroborate-containing cells achieve 62% capacity retention after 300 cycles at an areal capacity of 4.1 mAh cm−2 and electrolyte conditions of 1.5 g Ah−1 and 4 μL cm−2, establishing a mechanistic basis for adsorption-driven interfacial design in initially anode-free Li-metal batteries. Initially anode-free lithium-metal batteries are limited by unstable interfacial reactions at Cu current collectors. Here, authors show that preferential anion adsorption can stabilize the copper interface and improve long-term cycling.

Nature Communications
Oak Ridge National Laboratory (US), Korea Advanced Institute of Science and Technology (KR), Daegu Gyeongbuk Institute of Science and Technology (KR), Center for Nanophase Materials Sciences (US)
Advanced Battery Materials and Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon