Geotechnical characterization and foundation competence evaluation using shallow seismic refraction: a case study from Ain Sokhna, Gulf of Suez, Egypt

Abstract The evaluation of subsurface conditions and foundation competence is essential for sustainable infrastructure development in the Ain Sokhna area along the Gulf of Suez, Egypt. This study applies shallow seismic refraction surveys to characterize the geotechnical properties of near-surface materials and assess their suitability for engineering and construction. Seismic P-wave (Vp) velocities obtained from twenty survey sites were integrated with measured S-wave (Vs) velocities and density values to derive a comprehensive set of dynamic geotechnical parameters, including Poisson’s ratio, shear modulus, Young’s modulus, bulk modulus, material index, concentration index, stress ratio, ultimate bearing capacity, and allowable bearing capacity. Results reveal pronounced spatial variations in subsurface engineering characteristics. P-wave velocities range from 677 to 2330 m/s, while S-wave velocities vary between 376 and 1355 m/s. Velocity distributions show a systematic decrease from the northeastern to the southwestern sector, reflecting reduced density, stiffness, and rock-mass competence. This trend is corroborated by elastic parameters: shear modulus ranges from 224 to 3954 MPa, Young’s modulus from 571 to 9842 MPa, and bulk modulus from 427 to 6420 MPa. The northeastern sector exhibits higher velocities and moduli, indicating compacted, mechanically competent foundation materials, whereas the southwest shows lower values, suggesting increased fracturing, weathering, and diminished geotechnical quality. Bearing-capacity analyses are consistent with this zonation, with ultimate values between 2.0 and 85.4 kg/cm 2 and allowable values from 0.7 to 28.5 kg/cm 2 . The highest capacities occur in the northeast, while progressively weaker conditions dominate toward the southwest. The integrated results delineate two broad geotechnical zones, with comparatively competent materials in the northeastern, eastern, and central sectors and moderately competent materials toward the southwest.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-15
DOI
https://doi.org/10.1038/s41598-026-74814-8
Primary Topic
Geotechnical Engineering and Soil Mechanics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Geotechnical characterization and foundation competence evaluation using shallow seismic refraction: a case study from Ain Sokhna, Gulf of Suez, Egypt

Tarek Farag Shazly, Shokry A. Soliman, Mahmoud Ahmed Abed, Salah Shebl et al.
Scientific Reports
Geotechnical Engineering and Soil Mechanics
article

Geotechnical characterization and foundation competence evaluation using shallow seismic refraction: a case study from Ain Sokhna, Gulf of Suez, Egypt

Tarek Farag Shazly, Shokry A. Soliman, Mahmoud Ahmed Abed, Salah Shebl, Mohamed H. Farag
article en

Abstract

Abstract The evaluation of subsurface conditions and foundation competence is essential for sustainable infrastructure development in the Ain Sokhna area along the Gulf of Suez, Egypt. This study applies shallow seismic refraction surveys to characterize the geotechnical properties of near-surface materials and assess their suitability for engineering and construction. Seismic P-wave (Vp) velocities obtained from twenty survey sites were integrated with measured S-wave (Vs) velocities and density values to derive a comprehensive set of dynamic geotechnical parameters, including Poisson’s ratio, shear modulus, Young’s modulus, bulk modulus, material index, concentration index, stress ratio, ultimate bearing capacity, and allowable bearing capacity. Results reveal pronounced spatial variations in subsurface engineering characteristics. P-wave velocities range from 677 to 2330 m/s, while S-wave velocities vary between 376 and 1355 m/s. Velocity distributions show a systematic decrease from the northeastern to the southwestern sector, reflecting reduced density, stiffness, and rock-mass competence. This trend is corroborated by elastic parameters: shear modulus ranges from 224 to 3954 MPa, Young’s modulus from 571 to 9842 MPa, and bulk modulus from 427 to 6420 MPa. The northeastern sector exhibits higher velocities and moduli, indicating compacted, mechanically competent foundation materials, whereas the southwest shows lower values, suggesting increased fracturing, weathering, and diminished geotechnical quality. Bearing-capacity analyses are consistent with this zonation, with ultimate values between 2.0 and 85.4 kg/cm 2 and allowable values from 0.7 to 28.5 kg/cm 2 . The highest capacities occur in the northeast, while progressively weaker conditions dominate toward the southwest. The integrated results delineate two broad geotechnical zones, with comparatively competent materials in the northeastern, eastern, and central sectors and moderately competent materials toward the southwest.

Scientific ReportsVol. 16(1)
Al-Azhar University (EG), Egyptian Petroleum Research Institute (EG)
Geotechnical Engineering and Soil Mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon