A highly reliable, self-healing photovoltaic cell-level dynamic reconfigurable architecture based on software-defined energy flow management
Traditional crystalline silicon photovoltaic modules employ irreversible laminated packaging. Once individual cells fail or become obstructed, the entire string’s output power declines significantly, and repairs cannot be made without damaging the module—this constitutes a fundamental limitation of “static packaging.” This paper proposes a cell-level dynamic reconfigurable photovoltaic architecture that encapsulates each cell as a standardized “power generation cell,” integrating chip-level power optimizers, microfluidic active cooling systems, and high-speed industrial communication networks. Through a matrix backplate, the system enables online hot-swapping of cells and millisecond-scale electrical reconfiguration. This architecture redefines photovoltaic systems from static “power panels” into self-healing energy networks with physically maintainable components and software-defined energy pathways. A joint electrical-informatics-reliability simulation model was developed, comparing the proposed architecture with traditional modules under local failures, non-uniform shading, and long-term degradation conditions using Python simulations. Results demonstrate that during single-cell failure, the proposed architecture isolates the faulty cell and switches to backup cells within 5 ms, achieving power loss below 2%; over a 25-year lifecycle, the system’s rated output availability approaches 100%, whereas traditional modules show annual declines to approximately 82%. Active liquid cooling maintains cell temperatures at 45 ± 2 °C, thereby substantially reducing thermal hotspot risks under the simulated conditions. This study establishes a novel system paradigm and quantitative benchmark for next-generation high-reliability, intelligent photovoltaic power systems. The reported performance metrics are derived from numerical simulation; experimental validation through hardware-in-the-loop testing and outdoor prototyping remains necessary and is outlined as future work.
Authors
- Ding Wang (ORCID: https://orcid.org/0000-0002-2863-9303)
- Qianqian Zhu (ORCID: https://orcid.org/0009-0008-6963-3355)
- Fuyong Liu
- Shan Sun (ORCID: https://orcid.org/0009-0002-4808-615X)
- Yufeng Liu
Institutions
- Xinjiang University of Science and Technology (CN)
Publication Details
- Journal
- Scientific Reports
- Published
- 2026-11-15
- DOI
- https://doi.org/10.1038/s41598-026-76210-8
- Primary Topic
- Photovoltaic System Optimization Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00