Cavitation Number and Tip-Vortex Inception for a Merchant-Ship Propeller: Sigma, Advance Ratio and Wake Budgets
Cavitation number and tip-vortex inception for a merchant-ship propeller is examined for a five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind a single-screw merchant hull at a shaft immersion of 8.5 metres. Principal computed quantities: shaft pressure kPa = 186.9; dynamic pressure kPa = 52.12; cavitation number sigma = 3.553; tip speed m s = 31.67; advance ratio J = 0.7143; shaft immersion m = 8.5. The governing idea, for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres, runs as follows. Cavitation begins where the local pressure on a blade or in a tip vortex falls to vapour pressure; the cavitation number compares the available pressure margin with the dynamic pressure of the rotation, and inception is the sigma at which the margin is exactly consumed at the weakest point of the flow. Setting shaft pressure kPa at 186.9 beside dynamic pressure kPa at 52.12 shows, for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres, the scale, for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres, before interpretation. Both numbers, for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres, come from the cavitation number and tip-vortex inception for a merchant-ship propeller relations. The later discussion, for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres, sets shaft pressure kPa at 186.9 against published values for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres and names, for five-bladed propeller of 7.2 metres diameter turning at 84 revolutions per minute behind single-screw merchant hull at shaft immersion of 8.5 metres, the input moving shaft pressure kPa at 186.9 furthest.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238152
- Primary Topic
- Ship Hydrodynamics and Maneuverability
- Type
- article
- Field-Weighted Citation Impact
- 0.00