Mechanical Strength under Compressive Loading and Frictional Properties of Fresh Ginger (Zingiber officinale Roscoe)
The structural and frictional properties of fresh ginger are critical during processing and postharvest handling because inappropriate mechanical loading and contact conditions may increase deformation, tissue failure, and surface damage. This study was conducted to determine the mechanical strength behavior and friction properties of fresh ginger (Zingiber officinale Roscoe). Compression and puncture tests were performed using a Universal Testing Machine. The rupture force, rupture energy, deformation, rupture stress, rupture strain, toughness, hardness, firmness, penetration energy, and friction coefficients were determined. The average rupture force, rupture energy, and hardness were 204.14 N, 478.25 mJ, and 40.96 N mm⁻¹, respectively. Analysis of variance (ANOVA) showed that unpeeled ginger exhibited significantly higher firmness (54.04 N) and penetration energy (67.51 mJ) than peeled samples (P≤0.01). Rubber surfaces produced the highest static and dynamic friction coefficients, whereas stainless steel resulted in the lowest values. In addition, wet samples exhibited higher friction coefficients than dry samples on all tested surfaces. The findings provide engineering data that can be used in the design and optimization of harvesting, handling, transportation, storage, packaging, and processing systems for fresh ginger.
Authors
- Elçin Yeşiloğlu Cevher (ORCID: https://orcid.org/0000-0001-9062-923X)
Institutions
- Ondokuz Mayıs University (TR)
Publication Details
- Journal
- Black Sea Journal of Agriculture
- Published
- 2026-11-15
- DOI
- https://doi.org/10.47115/bsagriculture.2006881
- Primary Topic
- Agricultural Engineering and Mechanization
- Type
- article
- Field-Weighted Citation Impact
- 0.00