Potassium Feldspar Immersed in Droplets: Active-Site Density, Frozen Fraction and Airborne Abundance at Minus Fifteen Degrees
A budget for the feldspar case is constructed around the active-site description of immersion freezing, in which a particle surface carries a density of sites that each become active below a characteristic temperature, so the frozen fraction of a droplet follows one minus the exponential of site density times immersed surface area. Its subject is potassium-rich feldspar of the kind isolated from mineral dust and assayed in microlitre droplet freezing experiments, evaluated at minus fifteen degrees Celsius with a site density of 5e8 per square metre at that temperature, a temperature slope of 0.45 decades per kelvin, two thousand square micrometres of immersed mineral surface per assay droplet, a feldspar surface area of 4e-9 square metres per litre of air, an assumed contact angle of fifty-five degrees and an interfacial energy of 0.033 joules per square metre. It reports the site density at the stated temperature, the expected number of active sites in one assay droplet, the frozen fraction that follows, the airborne ice-nucleating particle concentration the same density implies, and the geometric barrier factor belonging to the stated contact angle. Site density 500,000,000 per m2 drives the feldspar case: 1 sites per assay droplet for the feldspar case, 0.632 of the assay of the feldspar case frozen, and 2 particles per litre airborne for the feldspar case. Feldspar is a minor constituent of dust by mass yet the dominant freezer in many assays; the site arithmetic shows how a rare surface can run a whole cloud process.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24242687
- Primary Topic
- Atmospheric aerosols and clouds
- Type
- article
- Field-Weighted Citation Impact
- 0.00