Frost on a Cold Plate in Humid Laboratory Air: Vapour Flux, Layer Thickness and Latent Heat Over Two Hours
Rests on diffusion-limited frost growth, where water vapour crosses a stagnant air layer toward a surface held below the frost point, deposits as ice at a rate set by the vapour density difference divided by the layer thickness, and releases the latent heat of sublimation at the growing front: the calculation for the cold plate case. Its subject is a horizontal cold plate at minus fifteen degrees Celsius facing laboratory air at twenty-two degrees and sixty percent relative humidity, with a vapour diffusivity of 2e-5 square metres per second across a five-millimetre stagnant layer, an initial frost density of sixty kilograms per cubic metre rising toward two hundred and fifty with a densification time of one hour, a frost conductivity of 0.15 watts per metre per kelvin, and a growth period of two hours. It derives the vapour density difference driving deposition, the mass flux onto the plate, the frost thickness after two hours before and after densification, the latent heat released per square metre, and the temperature drop the growing layer sustains. Deposition at 148 g/m2/h defines the cold plate case: 4.92 mm grown for the cold plate case, 0.295 kg/m2 held by the cold plate case, and a densified thickness of 1.32 mm for the cold plate case. A laboratory plate is where frost physics is calibrated; these are the fluxes and thicknesses that more complicated geometries must reproduce.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24242629
- Primary Topic
- Icing and De-icing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00