Vertical-Axis Tidal Rotor Power: Swept-Area Stream Power, Torque Ripple and Bidirectional Capture Budgets
The vertical-axis rotor is presented here: a computed vertical-axis rotor design, rated at 365 kilowatts, on the vertical-axis rotor's single stated vertical-axis rotor operating principle: straight or helical blades mounted parallel to a vertical shaft sweep a rectangular area through the current; the rotor accepts flow from any horizontal direction without yawing and turns on both flood and ebb with the same geometry — trading peak efficiency for mechanical simplicity and indifference to the tide's reversal. The vertical-axis rotor system is a rotor 12 metres in diameter and 10 metres tall in a stream of 2.8 metres per second, with power coefficient 0.32 applied to the computed swept area, and drivetrain losses stated. The vertical-axis rotor's target is the vertical-axis rotor net electrical output drawn from the swept-area stream power at the stated coefficient, with rotor thrust printed for the support design and the tip-speed ratio stated for the blade-speed account. For the vertical-axis rotor, the net output is 365 kilowatts, and the vertical-axis rotor's annual yield is 1.15 gigawatt-hours, at the vertical-axis rotor's capacity factor of 0.36. Through its swept area of 120 square metres pass 1350 kilowatts of stream power; thrust reaches 434 kilonewtons, and the blade tips run at 6.16 metres per second. From stated assumptions, simulated rather than measured, this civilian energy study has neither targeting nor weapon application and seeks none.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238497
- Primary Topic
- Wind Energy Research and Development
- Type
- article
- Field-Weighted Citation Impact
- 0.00