Formation of Hydrogen Gas Through Hydrolysis of Aluminum Waste Based on Variations of Activated Cl- Ion Catalyst

This research is motivated by the increasing demand for clean energy along with the depletion of fossil fuel reserves and the high greenhouse gas emissions produced. Hydrogen is an environmentally friendly alternative energy source because it has a high calorific value and produces only water as a by-product of combustion. One potential method of hydrogen production is aluminum hydrolysis, which is a reaction between aluminum and water accelerated by the addition of an alkaline solution as a catalyst. This study aims to analyze the effect of catalyst type, aluminum mass, and reaction temperature on the volume percentage of hydrogen gas (%vol H?) produced and to determine the optimum operating conditions. The research was conducted experimentally in the Chemical Engineering Laboratory of Sriwijaya State Polytechnic using aluminum as the raw material with variations of 2 grams, 3 grams, and 5 grams, reaction temperatures of 60°C, 80°C, and 100°C, and catalysts of NaOH 1 M and KOH 1 M. The hydrogen gas produced was analyzed using a Gas Analyzer to determine the volume percentage of hydrogen gas (%vol H?). The results showed that increasing the mass of aluminum and the reaction temperature increased hydrogen gas production for both types of catalysts. The use of NaOH 1 M resulted in %vol H? of 2.70–5.80%, while KOH 1 M produced 3.10–6.10%. The optimum conditions were obtained using KOH 1 M, with an aluminum mass of 5 grams, and a temperature of 100°C, yielding a hydrogen gas volume percentage of 6.10%, while the lowest result was obtained with NaOH 1 M, aluminum mass of 2 grams, and temperature of 60°C, which was 2.70%. This study indicates that KOH catalyst is more effective than NaOH in enhancing hydrogen gas production through aluminum hydrolysis. Contribution to Sustainable Development Goals (SDGs):SDG 7: Affordable and Clean EnergySDG 9: Industry, Innovation and InfrastructureSDG 12: Responsible Consumption and ProductionSDG 13: Climate Action

Authors

Publication Details

Journal
AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment)
Published
2026-11-16
DOI
https://doi.org/10.29165/ajarcde.v11i1.1461
Primary Topic
Hydrogen Storage and Materials
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Formation of Hydrogen Gas Through Hydrolysis of Aluminum Waste Based on Variations of Activated Cl- Ion Catalyst

Lailatus Sakinah, Metta Wijayanti, Erika Dwi Oktaviani, Melantina Oktriyanti et al.
AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment)
Hydrogen Storage and Materials
article

Formation of Hydrogen Gas Through Hydrolysis of Aluminum Waste Based on Variations of Activated Cl- Ion Catalyst

Lailatus Sakinah, Metta Wijayanti, Erika Dwi Oktaviani, Melantina Oktriyanti, Annisa Alvina Damayanti
article en

Abstract

This research is motivated by the increasing demand for clean energy along with the depletion of fossil fuel reserves and the high greenhouse gas emissions produced. Hydrogen is an environmentally friendly alternative energy source because it has a high calorific value and produces only water as a by-product of combustion. One potential method of hydrogen production is aluminum hydrolysis, which is a reaction between aluminum and water accelerated by the addition of an alkaline solution as a catalyst. This study aims to analyze the effect of catalyst type, aluminum mass, and reaction temperature on the volume percentage of hydrogen gas (%vol H?) produced and to determine the optimum operating conditions. The research was conducted experimentally in the Chemical Engineering Laboratory of Sriwijaya State Polytechnic using aluminum as the raw material with variations of 2 grams, 3 grams, and 5 grams, reaction temperatures of 60°C, 80°C, and 100°C, and catalysts of NaOH 1 M and KOH 1 M. The hydrogen gas produced was analyzed using a Gas Analyzer to determine the volume percentage of hydrogen gas (%vol H?). The results showed that increasing the mass of aluminum and the reaction temperature increased hydrogen gas production for both types of catalysts. The use of NaOH 1 M resulted in %vol H? of 2.70–5.80%, while KOH 1 M produced 3.10–6.10%. The optimum conditions were obtained using KOH 1 M, with an aluminum mass of 5 grams, and a temperature of 100°C, yielding a hydrogen gas volume percentage of 6.10%, while the lowest result was obtained with NaOH 1 M, aluminum mass of 2 grams, and temperature of 60°C, which was 2.70%. This study indicates that KOH catalyst is more effective than NaOH in enhancing hydrogen gas production through aluminum hydrolysis. Contribution to Sustainable Development Goals (SDGs):SDG 7: Affordable and Clean EnergySDG 9: Industry, Innovation and InfrastructureSDG 12: Responsible Consumption and ProductionSDG 13: Climate Action

AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment)Vol. 11(1)
Hydrogen Storage and Materials
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Formation of Hydrogen Gas Through Hydrolysis of Aluminum Waste Based on Variations of Activated Cl- Ion Catalyst — Lailatus Sakinah, Metta Wijayanti, et al. · AJARCDE (Asian Journal of Applied Research for Community Development and Empowerment) (2026) | TGRS Research Map | TGRS