A Tethered Aerostat Observatory Sized by Tether Tension, Wind Load and Station Power Budgets
This paper presents a computed design for moored aerostat carrying meteorological and air-quality instruments on a powered tether, operating on the following principle: a helium aerostat held by a winched tether works as a permanent elevated mast, drawing continuous power and data through the tether itself while its altitude is adjusted by winch rather than by flight. Moored at 1.2 km, Harbour Light develops 465 kg gross lift, holds 3.27 kN working tether tension in a 14 m/s design wind, and receives 1800 W continuously through its tether for a 30 day station month. Some observing problems need height without travel. A tethered aerostat offers a month at a fixed point above a coastline, with wall-socket power and fibre data, and its design questions concern wind, tension and lightning discipline rather than navigation. Sizing follows from computed lift-gas, envelope-stress, float-altitude, thermal day-night, ballast and energy-endurance and payload-recovery budgets, each worked in the deposited calculation script from stated inputs. This is a computed study with a civilian scientific purpose and no targeting or weapon application. SIMULATED, NOT MEASURED.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24248119
- Primary Topic
- Aerospace Engineering and Energy Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00