Pneumatic Chamber Array Power: Shared-Manifold Air Turbines, Per-Chamber Capture and Array-Interaction Budgets
The chamber array is presented here: a computed chamber array design, rated at 726 kilowatts, on the chamber array's single stated chamber array operating principle: a row of water-column chambers along a breakwater or reef crest shares one air manifold and one set of turbines; the chambers fire out of phase as the wave travels along the row, so the manifold smooths the pulsating air flow that a single chamber delivers in gusts — the array itself is the operating principle. The chamber array system is twenty-four chambers each 6 metres wide in waters of significant wave height 2.3 metres and energy period 8.0 seconds, with per-chamber capture width, a stated array interaction factor and a shared Wells-turbine efficiency. The chamber array's target is the chamber array net electrical output using the computed per-chamber pneumatic power summed over the array at the stated interaction factor, with manifold pressure printed because the shared duct, not any chamber, sets the turbines' working point. For the chamber array, the net output is 726 kilowatts, and the chamber array's annual yield is 1.72 gigawatt-hours, at the chamber array's capacity factor of 0.27. Per-chamber pneumatic power is 54.8 kilowatts before the array factor, and manifold pressure is about 12.7 kilopascals. Civilian energy supply is the sole purpose examined; the paper is a computed simulation from stated assumptions, not a measurement, and no targeting or weapon application is involved.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238461
- Primary Topic
- Wave and Wind Energy Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00