Ice-Tethered Profiler for Polar Oceans: Winch, Buoy and Cold-Energy Budgets for a Sea-Ice Drifting Observatory
The subject is a winched profiler on a sea-ice buoy proposed for an Arctic Ocean perennial ice zone. The system works as follows: a surface buoy frozen into drifting sea ice carries a winch that raises and lowers a small instrument package through the upper ocean beneath the ice, profiling the water column daily for years while the ice, and the buoy with it, drifts across the polar ocean. Each winch cycle to 760 metres costs a computed 7.4 watt-hours at the adopted winch load; after the cold derating of the battery the system supports about 1230 profiles, near 1.7 years at two profiles a day, with the wire and ice-hole budget, not the sensors, setting the practical limit. Cold is an engineering material in this design: battery capacity, lubricant behaviour, wire flexibility and the freezing of the access hole all change at polar temperatures, and the budgets carry a stated cold derating so the endurance figure is a winter figure, not a laboratory one. Buoyancy, pressure, link, endurance and drift budgets determine the whole sizing; the deposited script performs the arithmetic from the inputs it declares. Computed, not measured, and intended solely for civilian ocean observation, the design has no connection with any weapon or targeting purpose.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24245139
- Primary Topic
- Arctic and Antarctic ice dynamics
- Type
- article
- Field-Weighted Citation Impact
- 0.00