Ensuring the Performance of a Turbocharger Bearing Assembly of an Internal Combustion Engine

BACKGROUND: To increase power, modern internal combustion engines are equipped with turbochargers operating at high speeds and temperatures. The most heavily loaded component of a turbocharger is the bearing assembly. Its performance is largely determined by the lubrication system. When the engine lubrication systems and turbocharger bearings operate together, small abrasive particles generated by wear on the engine's friction components enter the bearing assembly along with the lubricant. This leads to increased wear and a reduced remaining service life of the bearing and the entire assembly. Therefore, a scientific hypothesis has been put forward that using a separate lubrication system for the turbocharger bearing assembly will increase engine life. AIM: To compare the change in the condition of turbochargers using a standard lubrication system and using a lubrication system for individual bearing assemblies. METHODS: A design for an individual lubrication system for the TKR-11 turbocharger bearing assembly for the YaMZ 238 engine has been developed, the novelty of which is confirmed by a patent. The effectiveness of the individual lubrication system was assessed through the effect of the bearing's remaining life on the mean time between failures of the entire turbocharger, depending on the vehicle's mileage. For this purpose, experimental studies were conducted under real-life operating conditions using KAMAZ vehicles equipped with a TRK-11 turbocharger. The experiment involved 13 vehicles with a standard (combined) lubrication system and three vehicles with an individual bearing assembly lubrication system. Vehicle mileage and changes in the turbocharger bearing assembly clearance were recorded during maintenance. RESULTS: With standard lubrication, the rotor spin-up time was 50 seconds, and by the sixth second, the pressure in the central oil line and in front of the rotor bearing had dropped to zero, indicating a semi-fluid or dry friction mode. With a dedicated lubrication system, the rotor rotated for up to 90 seconds. During this time, the oil pressure was 0.03 MPa. With standard turbocharger bearing lubrication, its service life is exhausted after 160,000 km. With a dedicated lubrication system, only 40% of the turbocharger bearing's service life is consumed over the same period. CONCLUSION: The dependence of the change in the remaining service life of a turbocharger bearing on the vehicle mileage was obtained. With a vehicle mileage of 70,000 km, the remaining service life of a bearing assembly with an individual lubrication system is twice that of one with standard lubrication; for vehicles with a mileage of 100,000 km, the increase was 42%; for vehicles with a mileage of 130,000 km, it was 34%.

Authors

Institutions

Publication Details

Journal
Tractors and Agricultural Machinery
Published
2026-11-15
DOI
https://doi.org/10.17816/0321-4443-701596
Primary Topic
Tribology and Lubrication Engineering
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Ensuring the Performance of a Turbocharger Bearing Assembly of an Internal Combustion Engine

Игорь Николаевич Гарькин, Irina Troyanovskaya, Марат Калимуллин, Sergey Aleksandrovich Voinash et al.
Tractors and Agricultural Machinery
Tribology and Lubrication Engineering
article

Ensuring the Performance of a Turbocharger Bearing Assembly of an Internal Combustion Engine

Игорь Николаевич Гарькин, Irina Troyanovskaya, Марат Калимуллин, Sergey Aleksandrovich Voinash, N P Ayugin, Галиев Ильгиз Гакифович
article en

Abstract

BACKGROUND: To increase power, modern internal combustion engines are equipped with turbochargers operating at high speeds and temperatures. The most heavily loaded component of a turbocharger is the bearing assembly. Its performance is largely determined by the lubrication system. When the engine lubrication systems and turbocharger bearings operate together, small abrasive particles generated by wear on the engine's friction components enter the bearing assembly along with the lubricant. This leads to increased wear and a reduced remaining service life of the bearing and the entire assembly. Therefore, a scientific hypothesis has been put forward that using a separate lubrication system for the turbocharger bearing assembly will increase engine life. AIM: To compare the change in the condition of turbochargers using a standard lubrication system and using a lubrication system for individual bearing assemblies. METHODS: A design for an individual lubrication system for the TKR-11 turbocharger bearing assembly for the YaMZ 238 engine has been developed, the novelty of which is confirmed by a patent. The effectiveness of the individual lubrication system was assessed through the effect of the bearing's remaining life on the mean time between failures of the entire turbocharger, depending on the vehicle's mileage. For this purpose, experimental studies were conducted under real-life operating conditions using KAMAZ vehicles equipped with a TRK-11 turbocharger. The experiment involved 13 vehicles with a standard (combined) lubrication system and three vehicles with an individual bearing assembly lubrication system. Vehicle mileage and changes in the turbocharger bearing assembly clearance were recorded during maintenance. RESULTS: With standard lubrication, the rotor spin-up time was 50 seconds, and by the sixth second, the pressure in the central oil line and in front of the rotor bearing had dropped to zero, indicating a semi-fluid or dry friction mode. With a dedicated lubrication system, the rotor rotated for up to 90 seconds. During this time, the oil pressure was 0.03 MPa. With standard turbocharger bearing lubrication, its service life is exhausted after 160,000 km. With a dedicated lubrication system, only 40% of the turbocharger bearing's service life is consumed over the same period. CONCLUSION: The dependence of the change in the remaining service life of a turbocharger bearing on the vehicle mileage was obtained. With a vehicle mileage of 70,000 km, the remaining service life of a bearing assembly with an individual lubrication system is twice that of one with standard lubrication; for vehicles with a mileage of 100,000 km, the increase was 42%; for vehicles with a mileage of 130,000 km, it was 34%.

Tractors and Agricultural Machinery
Peoples' Friendship University of Russia (RU), Kazan State Agrarian University (RU), Ulyanovsk State Agricultural Academy named after PA Stolypin (RU)
Tribology and Lubrication Engineering
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon