Multi-Rotor Array Wind Turbine: Combined Swept Area, Equivalent Diameter and Shared-Structure Budgets
This paper presents a computed multi-rotor turbine design, rated at 3565 kilowatts, on a single stated operating principle: several medium rotors are mounted on one shared support structure so their swept areas add while the tower, foundation and grid connection are bought once; blade cost scales down because many small blades are cheaper to build, transport and replace than one very large set. The system studied is seven rotors of 45 metres diameter on a shared lattice frame at a rated wind speed of 11 metres per second, each with power coefficient 0.44, giving a combined swept area equal to a single rotor of about 119 metres. The target quantity is net electrical output from the combined swept area and stream power, with the equivalent single-rotor diameter and per-rotor figures printed so the scaling argument can be checked line by line. For the multi-rotor turbine, the net output is 3565 kilowatts, and the annual yield is 10.6 gigawatt-hours, at a capacity factor of 0.34. Combined swept area is 11,133 square metres. Equivalent single-rotor diameter is 119 metres. Stream power over the combined area is 9076 kilowatts. Combined thrust is 660 kilonewtons. Civilian energy supply is the design's sole purpose; it has no targeting or weapon application, and the figures are simulated, not measured.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24239740
- Primary Topic
- Wind Energy Research and Development
- Type
- article
- Field-Weighted Citation Impact
- 0.00