Semi-Automatic Cleaning in the Pharmaceutical Industry
This presentation examines semi-automatic cleaning of shared production equipment in the pharmaceutical industry within the framework of Good Manufacturing Practice (GMP) and cleaning validation. It defines semi-automatic cleaning as a hybrid approach that combines manual gross-soil removal with controlled, automated wash cycles, and introduces the T.A.C.T. model (Temperature, Action, Chemistry, Time) as a basis for process parameter optimization and reproducibility. The work describes the principal equipment used, including pressure wands, ultrasonic baths and Clean-Out-of-Place (COP) washers. It provides a comparative analysis of manual, semi-automatic and fully automatic cleaning in terms of reproducibility, operator dependency, capital investment and validation complexity, and discusses the advantages and limitations of the semi-automatic approach. The second part addresses the verification of cleaning effectiveness through residue analysis. It covers sampling techniques (swab sampling and rinse sampling) and analytical detection methods, namely Total Organic Carbon (TOC) analysis and High-Performance Liquid Chromatography (HPLC). It then presents the establishment of acceptance criteria, including the calculation of the Maximum Allowable Carryover (MACO) from the Acceptable Daily Exposure (ADE) or Permitted Daily Exposure (PDE), supported by a worked example, together with legacy limits (10 ppm and 0.1% of the minimum daily dose). This material is intended for students, researchers and professionals in pharmaceutical engineering, quality assurance and GMP compliance.
Authors
- Rabah Mokhbi
- Moncef Chiheb Eddine Kacem
Institutions
- University of Blida (DZ)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-16
- DOI
- https://doi.org/10.5281/zenodo.24264561
- Primary Topic
- Analytical Methods in Pharmaceuticals
- Type
- article
- Field-Weighted Citation Impact
- 0.00