Lattice Boltzmann Method Simulation of Gas–Liquid Boiling Heat Transfer in Microchannel
The microscale boiling heat transfer processes of microchannel pool boiling and flow boiling were simulated by a numerical computational model of gas–liquid phase change heat transfer with the coupled pseudopotential lattice Boltzmann method in the present study. The nucleation, growth, detachment, and uplift processes of boiling bubbles were investigated under different conditions of gravity acceleration, Reynolds number Re, and wettability to obtain the influence laws of the fluid flow rate and channel wall wettability on the microchannel boiling heat transfer. It was found that the detachment diameter of boiling bubbles increased and the detachment speed slowed down when the gravity decreased; the increase of the heat transfer fluid flow rate accelerated the development speed and the detachment speed from the channel wall of boiling bubbles, which made the transient heat flux fluctuation at the bottom wall of the channel more frequent, but it had little effect on the peak value of the transient heat flux; under the same degree of superheat, the efficiency of microchannel boiling heat transfer was higher for microchannels with a hydrophobic surface.
Authors
- Zhang Huixiong
- Na Xu
- Peizhuo Liu
- Zhibo Hu
Institutions
- Taiyuan University of Technology (CN)
Publication Details
- Journal
- Journal of Thermophysics and Heat Transfer
- Published
- 2026-11-15
- DOI
- https://doi.org/10.2514/1.t7405
- Primary Topic
- Heat Transfer and Boiling Studies
- Type
- article
- Field-Weighted Citation Impact
- 0.00