Buoyancy-Engine Profiling Float for the Open Ocean: Displacement, Hull and Drift Budgets for a 2,000 Metre Profiling Cycle
This paper presents a computed design for a piston buoyancy-engine float at an open-ocean gyre, operating on the following principle: a hydraulic piston extends or retracts to change displaced volume by a fraction of a percent, so the float sinks to a parking depth, drifts with the current, then makes itself buoyant and rises while measuring temperature, salinity and pressure, telemetering each profile by satellite at the surface. At its 2000 metre rating the hull sees 20.2 megapascals and needs 9.9 millimetres of wall; a swept volume of 0.85 litres spans the density range of a full profile, and the energy budget supports 153 ten-day cycles, about 4.2 years of profiling. The governing trade is volumetric: seawater density changes by only a few parts in a thousand between the surface and two thousand metres, so the buoyancy engine, the hull compressibility and the float's own thermal expansion must be budgeted together, and a mismatch of a few tens of cubic centimetres decides whether the float surfaces or stalls at depth. All sizing follows from computed buoyancy, pressure-hull, acoustic-link where carried, energy-endurance and sensor-drift budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian ocean science; it is simulated, not measured, and no part of it concerns any weapon or targeting application.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24245039
- Primary Topic
- Underwater Vehicles and Communication Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00