Tidal Kite Power: Lift-Amplified Wing Speed, Tether Force and Figure-of-Eight Sweep Budgets
The tidal kite is presented here: a computed tidal kite design, rated at 211 kilowatts, on the tidal kite's single stated tidal kite operating principle: a small wing tethered to a seabed winch flies cross-current in a figure-of-eight, its hydrodynamic lift pulling it through the water many times faster than the stream itself; a turbine on the wing — or the tether's pull on the winch — harvests a flow the wing has amplified by its own motion. The tidal kite system is a wing of 10 square metres flying at a lift ratio of 7 in a stream of 1.6 metres per second, sweeping a stated cross-current window, with onboard generation efficiency and a duty factor for the flight cycle both stated. The tidal kite's target is the tidal kite net electrical output, taken from the computed wing speed, the stream power at the moving wing, a stated kite power coefficient and the flight duty factor, with tether force printed because the tether and its winch are the structure this design lives by. For the tidal kite, the net output is 211 kilowatts, and the tidal kite's annual yield is 0.684 gigawatt-hours, at the tidal kite's capacity factor of 0.37. The wing flies at 11.2 metres per second in a 1.6 metre-per-second stream, the tether carries 675 kilonewtons, and the swept window is 1080 square metres behind a wing of 10.0 square metres. Every budget here serves civilian energy supply; the study is computed and simulated from the stated assumptions, not measured, with no weapon application and no targeting role.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-15
- DOI
- https://doi.org/10.5281/zenodo.24238479
- Primary Topic
- Wave and Wind Energy Systems
- Type
- article
- Field-Weighted Citation Impact
- 0.00