Design Blueprint: Variable-Speed Pumped-Storage Unit with a Doubly-Fed Motor-Generator: Speed Range, Part-Load and Response Budgets for a 23 Megawatt Plant

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24242986): This paper presents a computed design for a reversible pump-turbine coupled to a doubly-fed induction motor-generator at a two reservoirs at moderate head serving a wind-heavy grid, operating on the following principle: a power-electronic converter in the rotor circuit lets the unit run above and below synchronous speed, so pumping power can be varied continuously, turbine efficiency can be held near its peak as head changes, and the machine can answer grid frequency events in either mode. A speed range of plus or minus 10% lifts round-trip efficiency to 80%, the reservoirs store 180 megawatt-hours for about 7.7 hours at 23,347 kilowatts, and the unit can move its output materially within 8 seconds. A fixed-speed storage unit pumps at essentially one power, which is a poor match for absorbing variable surplus generation. Variable speed removes that rigidity: in pumping, input follows the surplus; in generating, the runner can be kept near its best speed as the head falls. This study budgets the speed range, the part-load efficiency gain and the stored energy of such a unit, and states the converter rating implication that makes the flexibility possible. All sizing follows from computed head, flow, turbine-efficiency, cavitation and, where the design stores energy, storage budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian electricity production; it is simulated, not measured, and no part of it concerns any weapon or targeting application. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian hydroelectric energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24243210
Primary Topic
Power Systems and Renewable Energy
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Variable-Speed Pumped-Storage Unit with a Doubly-Fed Motor-Generator: Speed Range, Part-Load and Response Budgets for a 23 Megawatt Plant

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Power Systems and Renewable Energy
article

Design Blueprint: Variable-Speed Pumped-Storage Unit with a Doubly-Fed Motor-Generator: Speed Range, Part-Load and Response Budgets for a 23 Megawatt Plant

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24242986): This paper presents a computed design for a reversible pump-turbine coupled to a doubly-fed induction motor-generator at a two reservoirs at moderate head serving a wind-heavy grid, operating on the following principle: a power-electronic converter in the rotor circuit lets the unit run above and below synchronous speed, so pumping power can be varied continuously, turbine efficiency can be held near its peak as head changes, and the machine can answer grid frequency events in either mode. A speed range of plus or minus 10% lifts round-trip efficiency to 80%, the reservoirs store 180 megawatt-hours for about 7.7 hours at 23,347 kilowatts, and the unit can move its output materially within 8 seconds. A fixed-speed storage unit pumps at essentially one power, which is a poor match for absorbing variable surplus generation. Variable speed removes that rigidity: in pumping, input follows the surplus; in generating, the runner can be kept near its best speed as the head falls. This study budgets the speed range, the part-load efficiency gain and the stored energy of such a unit, and states the converter rating implication that makes the flexibility possible. All sizing follows from computed head, flow, turbine-efficiency, cavitation and, where the design stores energy, storage budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian electricity production; it is simulated, not measured, and no part of it concerns any weapon or targeting application. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian hydroelectric energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Power Systems and Renewable Energy
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Design Blueprint: Variable-Speed Pumped-Storage Unit with a Doubly-Fed Motor-Generator: Speed Range, Part-Load and Response Budgets for a 23 Megawatt Plant — William Alexander Aldred · Zenodo (CERN European Organization for Nuclear Research) (2026) | TGRS Research Map | TGRS