Design Blueprint: Dielectric-Elastomer Wave Power: Capacitive Energy per Cycle, Membrane Area and Cycle-Frequency Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24238402): The dielectric generator is presented here: a computed dielectric generator design, rated at 88.0 kilowatts, on the dielectric generator's single stated dielectric generator operating principle: a stretchable membrane coated with compliant electrodes is a capacitor whose capacitance changes as waves stretch it; charged at low stretch and discharged at high stretch through power electronics, each wave cycle pumps charge uphill and returns more electrical energy than was put in — the membrane is simultaneously structure, spring and generator. The dielectric generator system is a membrane array of 900 square metres working at a stated electrical energy yield per square metre per cycle, in a sea of significant wave height 1.6 metres and energy period 6.5 seconds that sets the cycle frequency. The dielectric generator's target is the dielectric generator net electrical output arrived at from the computed per-cycle energy over the membrane area at the wave frequency, corrected by power-electronics efficiency, with the implied capture width printed as a check that the electrical claim stays inside the incident wave resource. For the dielectric generator, the net output is 88.0 kilowatts, and the dielectric generator's annual yield is 0.201 gigawatt-hours, at the dielectric generator's capacity factor of 0.26. Each cycle yields 765 kilojoules across the array at 0.154 hertz, and the implied capture width of 14.4 metres can be checked against the array's physical extent. For civilian energy supply only, and for no targeting or weapon application, this computed study reports simulated figures from stated assumptions instead of measurements. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wave and tidal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24238756
Primary Topic
Wave and Wind Energy Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Dielectric-Elastomer Wave Power: Capacitive Energy per Cycle, Membrane Area and Cycle-Frequency Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Wave and Wind Energy Systems
article

Design Blueprint: Dielectric-Elastomer Wave Power: Capacitive Energy per Cycle, Membrane Area and Cycle-Frequency Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24238402): The dielectric generator is presented here: a computed dielectric generator design, rated at 88.0 kilowatts, on the dielectric generator's single stated dielectric generator operating principle: a stretchable membrane coated with compliant electrodes is a capacitor whose capacitance changes as waves stretch it; charged at low stretch and discharged at high stretch through power electronics, each wave cycle pumps charge uphill and returns more electrical energy than was put in — the membrane is simultaneously structure, spring and generator. The dielectric generator system is a membrane array of 900 square metres working at a stated electrical energy yield per square metre per cycle, in a sea of significant wave height 1.6 metres and energy period 6.5 seconds that sets the cycle frequency. The dielectric generator's target is the dielectric generator net electrical output arrived at from the computed per-cycle energy over the membrane area at the wave frequency, corrected by power-electronics efficiency, with the implied capture width printed as a check that the electrical claim stays inside the incident wave resource. For the dielectric generator, the net output is 88.0 kilowatts, and the dielectric generator's annual yield is 0.201 gigawatt-hours, at the dielectric generator's capacity factor of 0.26. Each cycle yields 765 kilojoules across the array at 0.154 hertz, and the implied capture width of 14.4 metres can be checked against the array's physical extent. For civilian energy supply only, and for no targeting or weapon application, this computed study reports simulated figures from stated assumptions instead of measurements. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wave and tidal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Wave and Wind Energy Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon